C175-16 Marine Engine Caterpillar


Inlet and Exhaust Valve Guides

Usage:

C175-16 M6A

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
283-0052  Valve Guide Driver 
284-1503  Collar 

Start By:

  1. Remove the inlet and exhaust valves.


    NOTICE

    Keep all parts clean from contaminants.

    Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01206606

  1. Turn over the cylinder head. Use Tooling (A) and a suitable hammer in order to remove valve guides (1) from the cylinder head.

Installation Procedure

  1. Install valve guides (1) in the reverse order of removal. Valve guide must extend 42.0 ± 0.50 mm (1.65 ± 0.020 inch) above the surface of the cylinder head.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.