Crankcase Breather
- Cut the cable straps and loosen hose clamp (3). Disconnect hose (4). Remove bolts (2) and the clamps. Remove crankcase breather (1) and the O-ring seal. Repeat for the opposite side.
Show/hide table
Illustration 1 | g02110813 |
- Install crankcase breathers (1) in the reverse order of removal.
Caterpillar Information System:
1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000} 1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000}
3516C Industrial Engine Model View Illustrations
C175-16 Marine Engine Idler Gears (Front)
C175-16 Marine Engine Crankshaft Front Seal
C175-16 Marine Engine Front Drive Housing
C175-16 Marine Engine Crankshaft Rear Seal
C175-16 Marine Engine Gear Group (Rear)
C175-16 Marine Engine Aftercooler
C175-16 Marine Engine Auxiliary Water Pump
C175-16 Marine Engines On-Board Replacement Parts
C175-16 Marine Engine Water Pump
2012/02/08 Turbocharger on Certain C6.6 Engines {1052, 1053, 1348}
C175-16 Marine Engine Rocker Shaft and Push Rods
C175-16 Marine Engine Rocker Shaft
C175-16 Marine Engine Cylinder Head
C175-16 Marine Engines Zinc Rods - Inspect/Replace
C175-16 Marine Engine Valve Lifter
2012/02/07 New Improved Hybrid Fuel lines Are Now Used on Certain C11 and C13 Industrial Engines {1274}
2012/02/27 An Alternate Repair Option Is Used for the Cat 270 Air Compressor {1803}
2015/08/07 Tab Must Be Removed on Certain Turbochargers That Are Equipped on Certain C7 and C9 On-Highway Truck Engines {1052, 1053}
C175-16 Marine Engine Camshaft
C175-16 Marine Engine Camshaft Bearings
C175-16 Marine Engine Piston Cooling Jets
3500B High Displacement Locomotive Engines Connecting Rod