Rocker Shaft
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
Start By:
- Remove the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Push Rod - Remove".
- Note the orientation of rocker arm assembly (1) for assembly purposes.
Note:
Show/hide tableIllustration 2 g01846480 - Remove rocker arms (2), and (8), and shaft (5) from support assembly (7).
- Remove rocker arms (2) and (8) from shaft (5).
- Use Tooling (A) and remove bushing (6) from rocker arm (2) and (8).
- Remove nut (3) and adjusting screw (4).
Show/hide table
Illustration 1 | g01846479 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
- Install adjusting screw (4) and nut (3).
- Use Tooling (A) and install bushing (6) into rocker arm (2) and (8). Make sure that the oil holes in bushing (6) are aligned with the oil holes in rocker arm (2) and (8). The oil holes must be aligned in the exact position.
- Install rocker arms (2) and (8) on shaft (5). Position rocker arms (2), and (8), and shaft (5) onto support assembly (7).
Show/hide table
Illustration 4 g01846479 - Ensure that rocker arm assembly (1) is correctly oriented in order to prevent damage.
Show/hide table
Illustration 3 | g01846480 |
End By:
- Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Push Rod - Install".
Caterpillar Information System:
C175-16 Marine Engine Rocker Shaft and Push Rods
C175-16 Marine Engine Crankcase Breather
1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000} 1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000}
3516C Industrial Engine Model View Illustrations
C175-16 Marine Engine Idler Gears (Front)
C175-16 Marine Engine Crankshaft Front Seal
C175-16 Marine Engine Front Drive Housing
C175-16 Marine Engine Crankshaft Rear Seal
C175-16 Marine Engine Gear Group (Rear)
C175-16 Marine Engine Aftercooler
C175-16 Marine Engine Auxiliary Water Pump
C175-16 Marine Engines On-Board Replacement Parts
C175-16 Marine Engine Cylinder Head
C175-16 Marine Engines Zinc Rods - Inspect/Replace
C175-16 Marine Engine Valve Lifter
2012/02/07 New Improved Hybrid Fuel lines Are Now Used on Certain C11 and C13 Industrial Engines {1274}
2012/02/27 An Alternate Repair Option Is Used for the Cat 270 Air Compressor {1803}
2015/08/07 Tab Must Be Removed on Certain Turbochargers That Are Equipped on Certain C7 and C9 On-Highway Truck Engines {1052, 1053}
C175-16 Marine Engine Camshaft
C175-16 Marine Engine Camshaft Bearings
C175-16 Marine Engine Piston Cooling Jets
3500B High Displacement Locomotive Engines Connecting Rod
3500C Marine Engines Product Lifting
2012/02/08 A New NOx Reduction System (NRS) Venturi Is Used on Certain C9.3 Industrial Engines {1071}