C32 Marine Engine Caterpillar


Refill Capacities

Usage:

C32 RSD

Sistem Pelumasan

Kapasitas pengisian ulang untuk karter engine mencerminkan kapasitas perkiraan dari karter atau wadah ditambah dengan filter oli standar. Sistem filter oli bantu akan memerlukan oli tambahan. Bacalah spesifikasi OEM untuk mengetahui kapasitas filter oli bantu.

Tabel 1
Perkiraan Kapasitas Isi Ulang 
Kompartemen atau Sistem  Liter  Quart 
Karter Engine(1)   138  146 
(1) Bak penampung oli dalam (500 jam)

Kapasitas Sistem Pendinginan

Untuk mempertahankan sistem pendinginan yang benar, total kapasitas sistem pendinginan harus diketahui. Kapasitas total sistem pendinginan akan bervariasi di antara masing-masing sistem. Sistem eksternal dapat mencakup komponen berikut: tangki ekspansi, radiator dan sistem perpipaan. Rujuk ke spesifikasi yang diberikan oleh OEM. Catat kapasitas total sistem pendinginan dalam Tabel yang benar.

Untuk cairan pendingin yang direkomendasikan, lihat Buku Petunjuk Pengoperasian dan Perawatan, "Rekomendasi Cairan".

Tabel 2
Engine C32 yang dilengkapi Sirkuit dengan AfterCooler Terpisah (SCAC, Separate Circuit Aftercooled) 
Sistem Cairan Pendingin  Kapasitas Pengisian Ulang 
Sistem mantel air  128 L (135 qt) 
Sistem SCAC  26,5 L (28 qt) 

Caterpillar Information System:

2014/01/27 Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
C11 and C13 Engines Exhaust Manifold
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Shipping the Machine
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Lifting and Tying Down the Machine
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System Oil Filter (Pilot) - Replace
G3500B Engines Detonation Sensor
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Swing Drive Oil - Change
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Swing Bearing - Lubricate
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Indicators and Gauges - Test
2011/12/22 An Improvement to the Electronic Control Module is Made on Certain Excavators {1931, 7600}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System Oil Level - Check
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System Oil Filter (Case Drain) - Replace
2011/11/11 Changes Have Been Made to the Fuel System Diagnostic Service Tests for C9.3 Industrial Engines {1250}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679} 1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
2011/11/29 New Software Is Now Used on Certain C15 Generator Sets {1901, 1920}
3516C Generator Set Engines Electronic Control Module (ECM)
C175-16 and C175-20 Generator Set Engines Engine Cranks but Does Not Start
C175-16 and C175-20 Generator Set Engines Exhaust Has Excessive White Smoke
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Swing Drive Oil Sample - Obtain
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Swing Gear - Lubricate
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Counterweight Removal and Installation
C15 and C18 Petroleum Generator Sets Circuit Breakers - Reset
3516C Generator Set Engines Restriction of Air Inlet and Exhaust
2011/11/11 New Software Enhances the Cylinder Cutout Feature on Certain 3516C Generator Set Engines {1901, 1920}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.