Swing Drive Oil Sample - Obtain
Show/hide table
Ilustrasi 1 | g02763417 |
Dipstick oli swing drive terletak di swing drive di pangkal belakang boom.
Catatan: Ada dua swing drive yang berada di antara sambungan swivel dan katup kontrol utama. Lakukan prosedur yang sama untuk kedua swing drive.
Show/hide table
Ilustrasi 2 | g01106264 |
Lakukan pengambilan sampel oli swing drive melalui lubang di dipstick. Baca Publikasi Khusus, SEBU6250, "S·O·S Oil Analysis" untuk mendapatkan informasi yang berhubungan dengan pengambilan sampel oli dari rumah swing drive. Baca Publikasi Khusus, PEGJ0047, "How To Take A Good Oil Sample" untuk mendapatkan informasi lebih lanjut mengenai pengambilan sampel oli dari rumah swing drive.
Caterpillar Information System:
C175-16 and C175-20 Generator Set Engines Exhaust Has Excessive White Smoke
C175-16 and C175-20 Generator Set Engines Engine Cranks but Does Not Start
3516C Generator Set Engines Electronic Control Module (ECM)
2011/11/29 New Software Is Now Used on Certain C15 Generator Sets {1901, 1920}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679} 1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
2011/11/11 Changes Have Been Made to the Fuel System Diagnostic Service Tests for C9.3 Industrial Engines {1250}
C32 Marine Engine Refill Capacities
2014/01/27 Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
C11 and C13 Engines Exhaust Manifold
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Shipping the Machine
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Lifting and Tying Down the Machine
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System Oil Filter (Pilot) - Replace
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Swing Gear - Lubricate
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Counterweight Removal and Installation
C15 and C18 Petroleum Generator Sets Circuit Breakers - Reset
3516C Generator Set Engines Restriction of Air Inlet and Exhaust
2011/11/11 New Software Enhances the Cylinder Cutout Feature on Certain 3516C Generator Set Engines {1901, 1920}
Procedure for Updating the C27 Engines in Certain O;K Shovel Excavators{1000} Procedure for Updating the C27 Engines in Certain O&K Shovel Excavators{1000}
2011/11/29 An Improved Oil Filter Assembly Cover Is Now Used on Certain C9 Marine Engines {1306, 1308}
C11 and C13 Petroleum Engines Maintenance Interval Schedule
Relay Inspection and Replacement on Certain Gensets{4460, 4493} Relay Inspection and Replacement on Certain Gensets{4460, 4493}
2011/11/11 Improved Alternator Guards Are Used on Certain C32 Engines {1154, 1405}
2011/11/18 Improved Seal Kits are Now Used on Certain Excavators {5456, 5457, 5458}
2012/02/06 The Lever for the Position of the Seat Cushion has been Improved on Certain Excavators {7312}