Plate Locations and Film Locations
Show/hide table
Ilustrasi 1 | g01922402 |
Pelat Nomor Seri untuk Generator (1)
Identifikasi generator terletak di sisi generator.
Stiker identifikasi generator mencakup informasi berikut:
- Nomor seri untuk generator ____________________
- Nomor model generator ____________________
Pelat Nomor Seri Engine ada di sisi kanan bawah blok silinder, di dekat bagian belakang engine.
Pelat Nomor Seri Engine berisi informasi berikut:
- Nomor seri engine____________________
- Nomor model engine ____________________
- Nomor pengaturan ____________________
Pelat Informasi Engine terletak pada penutup katup.
Pelat Informasi Engine berisi informasi berikut:
- Nomor seri engine____________________
- Nomor pengaturan ____________________
- Rasio kompresi ____________________
- Temperatur aftercooler ____________________
- Daya ____________________
- RPM beban penuh ____________________
Caterpillar Information System:
G3304B and G3306B Engines Gas Pressure Regulator - Install
C13 Engine for Combat and Tactical Vehicles Air Lines
C11 and C13 Engines Cylinder Head Valves
G3304B and G3306B Engines Gas Pressure Regulator - Assemble
G3304B and G3306B Engines Gas Pressure Regulator - Disassemble
G3304B and G3306B Engines Starting Air Pressure - Adjust
G3304B and G3306B Engines Air Starting Motor - Lubricate
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Replaced Relay or Solenoid Does Not Operate
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Transmission Does Not Automatically Shift Back Into Gear
G3304B and G3306B Engines Unburned Gas - Purge
G3304B and G3306B Engines Gas Pressure Regulator - Remove
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Transmission Does Not Automatically Shift Into Neutral
C11 and C13 Engines Engine Oil Pump
G3304B and G3306B Engines Carburetor - Remove
C9.3 Engines for Caterpillar Built Machines Fuel Lines - Remove and Install
2009/06/01 Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
G3304B and G3306B Engines Spark Plug - Test
Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920} Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920}
Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105} Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105}
C11, C13 and C15 On-highway Engines 0173-00 High Exhaust Gas Temperature Derate
2009/06/08 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
2009/06/01 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
3516B Engine for 994F and 994H Wheel Loaders Power Is Intermittently Low or Power Cutout Is Intermittent
C18 Marine Generator Set Model View Illustrations