G3304B and G3306B Engines Caterpillar


Gas Pressure Regulator - Install

Usage:

G3304B A4E

安装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     6V-1541     快速硫化底漆     -    

  1. 如有必要,安装之前先将工具 (A) 涂抹在管组件上。



    图 1g01921955

  1. 定位气体压力调节器 (1) 并安装螺栓 (2) 。

  1. 将管组件 (3) 连接到气体压力调节器的接头上。

  1. 将卡箍 (4) 安装在接头组件上。

  1. 将管路连接到气体压力调节器,并打开气体供给。

Caterpillar Information System:

C13 Engine for Combat and Tactical Vehicles Air Lines
C11 and C13 Engines Cylinder Head Valves
G3304B and G3306B Engines Gas Pressure Regulator - Assemble
G3304B and G3306B Engines Gas Pressure Regulator - Disassemble
G3304B and G3306B Engines Starting Air Pressure - Adjust
G3304B and G3306B Engines Air Starting Motor - Lubricate
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Replaced Relay or Solenoid Does Not Operate
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Transmission Does Not Automatically Shift Back Into Gear
G3304B and G3306B Engines Unburned Gas - Purge
G3304B and G3306B Engines Gas Pressure Regulator - Remove
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Transmission Does Not Automatically Shift Into Neutral
C9.3 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
C18 Marine Engine Plate Locations and Film Locations
C11 and C13 Engines Engine Oil Pump
G3304B and G3306B Engines Carburetor - Remove
C9.3 Engines for Caterpillar Built Machines Fuel Lines - Remove and Install
2009/06/01 Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
G3304B and G3306B Engines Spark Plug - Test
Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920} Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920}
Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105} Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105}
C11, C13 and C15 On-highway Engines 0173-00 High Exhaust Gas Temperature Derate
2009/06/08 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
2009/06/01 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
3516B Engine for 994F and 994H Wheel Loaders Power Is Intermittently Low or Power Cutout Is Intermittent
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.