A New Paint Scheme Is Used on C7 through C32 Marine Engines with the Pleasurecraft Finish {1000, 7559, 7581}
- Engine:
- C7 (S/N: M7A1-UP; M7G1-UP)
- Generator Set:
- C18 (S/N: GEN1-UP)
- C9 (S/N: C9Y1-UP; X9Y1-UP)
- C12 (S/N: NFL1-UP)
- C-12 (S/N: K1M1-UP)
- C18 (S/N: PLE1-UP; GES1-UP; JKX1-UP; T2P1-UP)
- C32 (S/N: RNY1-UP; RNZ1-UP)
- C32 (S/N: RNX1-UP)
Description of Change: A new paint scheme has been introduced on all C7 through C32 Marine Engines with the Pleasurecraft Finish. The turbochargers and some related components will now be painted black on all models.
Note: Paint schemes vary by engine model.
Adaptable To: This change will be effective for C32 engines that are built after 12March 2009. The change will become effective on other models in the early second quarter of 2009.
Caterpillar Information System:
2009/04/13 Procedure to Install the Muffler Bracket on Weatherproof Generator Set Enclosures and Improved Sealing of the Enclosures {0649, 1062}
C13, C15, and C18 Tier 4 Interim Engines Engine Overspeeds
C13 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Symptom Troubleshooting
C7.1 Industrial Engine and Generator Set ECM Memory - Test
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner - Remove and Install
C12 Marine Engines Engine and Marine Transmission Operation
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0271 - FMI 03
C13, C15, and C18 Tier 4 Interim Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Cooling Fan Is Always ON
C6.6 Industrial Engine Starter Motor
Installation and Maintenance of the Microfilter for Natural Gas {1261} Installation and Maintenance of the Microfilter for Natural Gas {1261}
C13 Engine for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Crankcase Pressure Is High
C13 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Engine Stalls at Low RPM
C13 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Top Speed Is Not Obtained
C13 Engine for Caterpillar Built Machines Alternator - Remove and Install
Quick Start Guide for Manual Paralleling{7451} Quick Start Guide for Manual Paralleling{7451}
C7.1 Industrial Engine Model View Illustrations
C13, C15, and C18 Tier 4 Interim Engines Exhaust Has Excessive White Smoke
C13 Engine for Caterpillar Built Machines Refrigerant Compressor - Remove and Install