C13, C15, and C18 Tier 4 Interim Engines Caterpillar


Cooling Fan Is Always ON

Usage:

C18 BDN

可能原因

  • 冷却风扇的工作情况

建议的措施

表 1
故障诊断与排除测试步骤     数值     结果    

1. 检查冷却风扇的工作情况

A. 在 Caterpillar 电子技师(ET)和发动机控制模块(ECM)之间建立通信。 如有必要,请参阅故障诊断与排除, "电子维修工具"。

B. 检查风扇控制参数的数值。
   

冷却风扇参数
   

结果:参数未编程为允许风扇工作。

ECM 未控制冷却风扇。 请参阅底盘的故障诊断与排除信息,以进行冷却风扇的故障诊断与排除。

结果:参数编程为允许风扇工作。

ECM 正在控制冷却风扇。 请参阅故障诊断与排除, "冷却风扇控制 - 测试",以进行冷却风扇的故障诊断与排除。
   

按所列步骤顺序完成以上步骤。

如果以上步骤未解决问题,请联系当地 Cat 代理商的技术通信员(TC)。 如需进一步的帮助,您的 TC 可以通过代理商解决方案网络(DSN)与您交谈。

Caterpillar Information System:

C6.6 Industrial Engine Starter Motor
C6.6 Industrial Engine Engine Oil Pressure
C9.3 Engines for Caterpillar Built Machines Valve Lash Is Excessive
C9.3 Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
C32 Auxiliary Engine Maintenance Recommendations
C13 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
C13, C15, and C18 Tier 4 Interim Engines Engine Has Early Wear
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Engine Does Not Crank
C12 Marine Engines Fuel System Secondary Filter - Replace
C15 and C18 Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Power Is Intermittently Low or Power Cutout Is Intermittent
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0271 - FMI 03
C12 Marine Engines Engine and Marine Transmission Operation
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner - Remove and Install
C7.1 Industrial Engine and Generator Set ECM Memory - Test
C9.3 Engines for Caterpillar Built Machines Symptom Troubleshooting
C13 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Engine Overspeeds
2009/04/13 Procedure to Install the Muffler Bracket on Weatherproof Generator Set Enclosures and Improved Sealing of the Enclosures {0649, 1062}
2009/04/06 A New Paint Scheme Is Used on C7 through C32 Marine Engines with the Pleasurecraft Finish {1000, 7559, 7581}
Installation and Maintenance of the Microfilter for Natural Gas {1261} Installation and Maintenance of the Microfilter for Natural Gas {1261}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.