C13 Engine for Caterpillar Built Machines Caterpillar


Refrigerant Compressor - Remove and Install

Usage:

730C2 2T4

Removal Procedure

  1. Remove the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".


    Illustration 1g01872055

  2. Remove bolts (2) and refrigerant compressor (1).

Installation Procedure

  1. Install refrigerant compressor (1) in reverse order of removal.

Caterpillar Information System:

C13, C15, and C18 Tier 4 Interim Engines Exhaust Has Excessive White Smoke
C7.1 Industrial Engine Model View Illustrations
Quick Start Guide for Manual Paralleling{7451} Quick Start Guide for Manual Paralleling{7451}
C13 Engine for Caterpillar Built Machines Alternator - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Top Speed Is Not Obtained
C13 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Engine Stalls at Low RPM
C13 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Crankcase Pressure Is High
C13 Engine for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
Installation and Maintenance of the Microfilter for Natural Gas {1261} Installation and Maintenance of the Microfilter for Natural Gas {1261}
2009/04/06 A New Paint Scheme Is Used on C7 through C32 Marine Engines with the Pleasurecraft Finish {1000, 7559, 7581}
2009/04/13 An Improved PL1000E Electronic Control Module Is Now Used {7610}
C13 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
2009/04/06 New Springs Are Now Used on CX31 On-Highway Transmission {3155}
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (Exhaust Balance) - Remove and Install
C13 Engines for Caterpillar Built Machines Front Cover - Remove and Install
795F AC and 795F AC XQ Off-Highway Trucks Ground Fault - Check
525D, 535D, 545D and 555D Wheel Skidders Symptom Troubleshooting
C18 Marine Auxiliary Engine Refill Capacities and Recommendations
C7.1 Industrial Engine and Generator Set Engine Wiring Information
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0271 - FMI 05
C13 Engine for Caterpillar Built Machines Gear Group (Front) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.