Front Cover - Remove and Install
Start By:
- Remove the accessory drive.
- Remove the vibration damper and the pulley.
- Remove bolts (2), tube assembly (1), and the O-ring seal.
Show/hide table
Illustration 2 g01872517 - Remove bolts (4) and (5).
- Remove studs (3), front cover (6), and the gasket.
Show/hide table
| |
| Illustration 1 | g01872516 |
- Install front cover (6) in reverse order of removal.
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (Exhaust Balance) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
2009/04/06 New Springs Are Now Used on CX31 On-Highway Transmission {3155}
C13 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
2009/04/13 An Improved PL1000E Electronic Control Module Is Now Used {7610}
C13 Engine for Caterpillar Built Machines Refrigerant Compressor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Exhaust Has Excessive White Smoke
C7.1 Industrial Engine Model View Illustrations
Quick Start Guide for Manual Paralleling{7451} Quick Start Guide for Manual Paralleling{7451}
C13 Engine for Caterpillar Built Machines Alternator - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Top Speed Is Not Obtained
C13 Engines for Caterpillar Built Machines Flywheel - Remove and Install
795F AC and 795F AC XQ Off-Highway Trucks Ground Fault - Check
525D, 535D, 545D and 555D Wheel Skidders Symptom Troubleshooting
C18 Marine Auxiliary Engine Refill Capacities and Recommendations
C7.1 Industrial Engine and Generator Set Engine Wiring Information
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0271 - FMI 05
C13 Engine for Caterpillar Built Machines Gear Group (Front) - Remove and Install
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0296 - FMI 02
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0296 - FMI 09
2009/04/13 New Application Loader Software For Caterpillar Switch Gear Is Now Available {4491, 7620}
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0590 - FMI 02
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0590 - FMI 09
Update to the Wiring Harness and the Electrical System on Some C-15 Engines for Hazardous Locations{1000, 1408, 1901} Update to the Wiring Harness and the Electrical System on Some C-15 Engines for Hazardous Locations{1000, 1408, 1901}