An Improved PL1000E Electronic Control Module Is Now Used {7610}
- Electric Power Generation:
- All
- Engine: Industrial, Marine, and Generator Set that Use Flash Programming
- All
- All
Description of Change: A new Transceiver Chip is now used in order to improve communications with various types of Modbus RS485 Masters for the 256-7512 Electronic Control Module (PL1000E). The new Transceiver Chip has increased the reliability of the RS485 communications.
Adaptable To: This improvement has been implemented on the products that are listed above.
Caterpillar Information System:
C13 Engine for Caterpillar Built Machines Refrigerant Compressor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Exhaust Has Excessive White Smoke
C7.1 Industrial Engine Model View Illustrations
Quick Start Guide for Manual Paralleling{7451} Quick Start Guide for Manual Paralleling{7451}
C13 Engine for Caterpillar Built Machines Alternator - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Top Speed Is Not Obtained
C13 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Engine Stalls at Low RPM
C13 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Crankcase Pressure Is High
C13 Engine for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
Installation and Maintenance of the Microfilter for Natural Gas {1261} Installation and Maintenance of the Microfilter for Natural Gas {1261}
C13 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
2009/04/06 New Springs Are Now Used on CX31 On-Highway Transmission {3155}
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (Exhaust Balance) - Remove and Install
C13 Engines for Caterpillar Built Machines Front Cover - Remove and Install
795F AC and 795F AC XQ Off-Highway Trucks Ground Fault - Check
525D, 535D, 545D and 555D Wheel Skidders Symptom Troubleshooting
C18 Marine Auxiliary Engine Refill Capacities and Recommendations
C7.1 Industrial Engine and Generator Set Engine Wiring Information
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0271 - FMI 05
C13 Engine for Caterpillar Built Machines Gear Group (Front) - Remove and Install
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0296 - FMI 02