Crankshaft Pulley
Show/hide table
Illustration 1 | g00915497 |
Typical example |
(1) Tighten the three bolts progressively for the crankshaft pulley to the following torque. ...
Note: Recheck the torque of the bolts (1) twice.
(2) Thrust block
(3) Crankshaft pulley
Caterpillar Information System:
C3.3 Industrial Engine Crankshaft - Steel Crankshaft
C3.3 Industrial Engine Fuel Injection Pump
C3.3 Industrial Engine Fuel Injection Lines
3608 Engine Valve Lifter - Disassemble
3608 Engine Valve Mechanism - Remove
3608 Engine Cylinder Head - Assemble
3608 Engine Cylinder Head - Disassemble
3608 Engine Flywheel and Ring Gear - Remove and Install
EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490} EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}
G3520C and G3520E Engines Engine Oil Pan
2007/10/08 Improved Reliability of the Crankshaft Flange {1157}
C9 Petroleum Engines Jacket Water Heater
C3.3 Industrial Engine Alternator
2008/10/06 A New Wire Harness for Marine Transmissions is Now Available {1408, 3030}
C3.3 Industrial Engine Turbocharger
C3.3 Industrial Engine Rocker Shaft
3608 Engine Cylinder Liner - Remove
C3.3 Industrial Engine Camshaft
C3.3 Industrial Engine Gear Group (Front)
3608 Engine Piston Cooling Jets - Remove and Install
C3.3 Industrial Engine Cylinder Head Valves
C3.3 Industrial Engine Engine Design
3608 Engine Piston and Connecting Rods - Remove
3608 Engine Piston and Connecting Rods - Install