Jacket Water Heater
Show/hide table
Illustration 1 | g01418997 |
Right view of engine |
(1) Apply 5P-3975 Rubber Lubricant to the O-ring seal immediately prior to assembly.
(2) Use the dust cap assembly to protect the terminals, when cord assembly is disconnected from the jacket water heater element assembly.
(3) Jacket water heater element assembly
- Power ... 1500 Watts
- Voltage ... 120 VDC
- Current ... 12.5 Amp
- Resistance ... 9.6 Ohms
- Voltage ... 120 VDC
Caterpillar Information System:
C18 Petroleum Generator Sets Maintenance Interval Schedule - Standby
C18 Petroleum Generator Sets Maintenance Interval Schedule - Prime Power
Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610} Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610}
Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451} Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451}
C15 and C18 Petrolem Generator Set Engines Event Codes
G3520B Engine Safety Messages
2007/10/15 Piston and Ring Wear {1225}
3608 Engine General Information - Reference Material
G3500 Engines Thermostatic Valve
Repair of the Oil Filler Tube {1316} Repair of the Oil Filler Tube {1316}
2007/10/08 Improved Low Coolant Level Sensors On Generator Sets {1439, 7470}
2007/10/01 The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
2007/10/08 Improved Reliability of the Crankshaft Flange {1157}
G3520C and G3520E Engines Engine Oil Pan
EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490} EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}
3608 Engine Flywheel and Ring Gear - Remove and Install
3608 Engine Cylinder Head - Disassemble
3608 Engine Cylinder Head - Assemble
3608 Engine Valve Mechanism - Remove
3608 Engine Valve Lifter - Disassemble
C3.3 Industrial Engine Fuel Injection Lines
C3.3 Industrial Engine Fuel Injection Pump
C3.3 Industrial Engine Crankshaft - Steel Crankshaft
C3.3 Industrial Engine Crankshaft Pulley