G3500 Engines Caterpillar


Thermostatic Valve

Usage:

G3516 4EK


Illustration 1g03025396

Table 1
Specification for 227-3805 Housing and Regulator Gp 
Item  Qty  Part  Specification Description 
204-6708 Water Temperature Regulator  Start to open temperature is 47 to 51 °C (117 to 124 °F).
Fully open temperature is 60 °C (140 °F).
Minimum opening distance (A) at fully open temperature is 10.4 mm (0.41 inch)
3K-0360 O-Ring Seal  Before assembly, lubricate the bores with glycerin or an approved equivalent. 

Caterpillar Information System:

Repair of the Oil Filler Tube {1316} Repair of the Oil Filler Tube {1316}
2007/10/08 Improved Low Coolant Level Sensors On Generator Sets {1439, 7470}
2007/10/01 The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
G3520B Engines Fuel Lines
2007/10/01 Improved Fuel Transfer Pump {1258, 1260}
G3520B Engines Fuel Lines
2007/10/01 Matched Receiver Firmware for AccuGrade Dual GPS Systems {7010, 7620}
2007/09/01 O-ring Aids in Engine Break-in {1251, 1290}
2007/09/24 O-ring Aids in Engine Break-in {1251, 1290}
Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610} Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610}
TH31 Well Servicing Transmissions Transfer Gears - Assemble
3608 Engine General Information - Reference Material
2007/10/15 Piston and Ring Wear {1225}
G3520B Engine Safety Messages
C15 and C18 Petrolem Generator Set Engines Event Codes
Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451} Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451}
Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610} Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610}
C18 Petroleum Generator Sets Maintenance Interval Schedule - Prime Power
C18 Petroleum Generator Sets Maintenance Interval Schedule - Standby
C9 Petroleum Engines Jacket Water Heater
2007/10/08 Improved Reliability of the Crankshaft Flange {1157}
G3520C and G3520E Engines Engine Oil Pan
EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490} EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.