G3520C and G3520E Engines Caterpillar


Engine Oil Pan

Usage:

G3520C B9P


Illustration 1g03269836

Table 1
Specification for 151-2724 Oil Pan Gp 
Item  Qty  Part  Specification Description 
Before assembly, apply clear Loctite RTV silicone or permetex number 2 sealant to the connecting joint of the flywheel housing and the cylinder block. 
152-0111 Gasket  Before assembly, as required apply clear Loctite RTV silicone or permetex number 2 sealant. 
Before assembly, apply clear Loctite RTV silicone or permetex number 2 sealant to the connecting joint of the cylinder block and the front housing group. 
3P-0654 O-Ring Seal  Before assembly, lubricate the bore with green 1P-0808 Multipurpose Grease. 

Caterpillar Information System:

2007/10/08 Improved Reliability of the Crankshaft Flange {1157}
C9 Petroleum Engines Jacket Water Heater
C18 Petroleum Generator Sets Maintenance Interval Schedule - Standby
C18 Petroleum Generator Sets Maintenance Interval Schedule - Prime Power
Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610} Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610}
Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451} Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451}
C15 and C18 Petrolem Generator Set Engines Event Codes
G3520B Engine Safety Messages
2007/10/15 Piston and Ring Wear {1225}
3608 Engine General Information - Reference Material
G3500 Engines Thermostatic Valve
Repair of the Oil Filler Tube {1316} Repair of the Oil Filler Tube {1316}
EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490} EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}
3608 Engine Flywheel and Ring Gear - Remove and Install
3608 Engine Cylinder Head - Disassemble
3608 Engine Cylinder Head - Assemble
3608 Engine Valve Mechanism - Remove
3608 Engine Valve Lifter - Disassemble
C3.3 Industrial Engine Fuel Injection Lines
C3.3 Industrial Engine Fuel Injection Pump
C3.3 Industrial Engine Crankshaft - Steel Crankshaft
C3.3 Industrial Engine Crankshaft Pulley
C3.3 Industrial Engine Alternator
2008/10/06 A New Wire Harness for Marine Transmissions is Now Available {1408, 3030}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.