Alternator
Show/hide table
Illustration 1 | g00959541 |
A typical alternator |
(1) Tighten terminal nut "W" to the following torque. ...
(2) Tighten terminal nut "D+" to the following torque. ...
(3) Tighten terminal nut "B+" to the following torque. ...
Tighten the pulley nut (not shown) to the following torque. ...
Alignment of the alternator pulley to the crankshaft pulley ...
Rotation ... clockwise
Polarity ... Negative earth
Note: The V-belt must be checked by a gauge. Refer to Operation and Maintenance Manual, "Alternator and Fan Belts - Inspect/Adjust/Replace" for the correct type of gauge in order to check the V-belt.
Initial V-belt tension ...
Used V-belt tension ...
Caterpillar Information System:
C3.3 Industrial Engine Crankshaft Pulley
C3.3 Industrial Engine Crankshaft - Steel Crankshaft
C3.3 Industrial Engine Fuel Injection Pump
C3.3 Industrial Engine Fuel Injection Lines
3608 Engine Valve Lifter - Disassemble
3608 Engine Valve Mechanism - Remove
3608 Engine Cylinder Head - Assemble
3608 Engine Cylinder Head - Disassemble
3608 Engine Flywheel and Ring Gear - Remove and Install
EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490} EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}
G3520C and G3520E Engines Engine Oil Pan
2007/10/08 Improved Reliability of the Crankshaft Flange {1157}
2008/10/06 A New Wire Harness for Marine Transmissions is Now Available {1408, 3030}
C3.3 Industrial Engine Turbocharger
C3.3 Industrial Engine Rocker Shaft
3608 Engine Cylinder Liner - Remove
C3.3 Industrial Engine Camshaft
C3.3 Industrial Engine Gear Group (Front)
3608 Engine Piston Cooling Jets - Remove and Install
C3.3 Industrial Engine Cylinder Head Valves
C3.3 Industrial Engine Engine Design
3608 Engine Piston and Connecting Rods - Remove
3608 Engine Piston and Connecting Rods - Install
G3520B Engine Product Description