Engine Design
Show/hide table
Illustration 1 | g01419418 |
Cylinder and valve location (A) Exhaust valve (B) Inlet valve |
Bore ...
Stroke ...
Displacement ...
Cylinder arrangement ... In-line
Type of combustion ... Direct injection
Compression ratio
- Naturally aspirated engines ... 19.3:1
- Turbocharged engines ... 18.2:1
- Turbocharged engines ... 17.2:1
- Turbocharged engines ... 18.2:1
Number of cylinders ... 3
Valves per cylinder ... 2
Valve lash
- Inlet valve ...
0.20 mm (0.008 inch) - Exhaust valve ...
0.45 mm (0.018 inch) - Exhaust valve ...
Firing order ... 1, 2, 3
When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction: ... Clockwise
When the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction: ... Clockwise
The front of the engine is opposite the flywheel end. The left side and the right side of the engine are viewed from the flywheel end. The No. 1 cylinder is the front cylinder.
Caterpillar Information System:
C3.3 Industrial Engine Cylinder Head Valves
3608 Engine Piston Cooling Jets - Remove and Install
C3.3 Industrial Engine Gear Group (Front)
C3.3 Industrial Engine Camshaft
3608 Engine Cylinder Liner - Remove
C3.3 Industrial Engine Rocker Shaft
C3.3 Industrial Engine Turbocharger
2008/10/06 A New Wire Harness for Marine Transmissions is Now Available {1408, 3030}
C3.3 Industrial Engine Alternator
C3.3 Industrial Engine Crankshaft Pulley
C3.3 Industrial Engine Crankshaft - Steel Crankshaft
C3.3 Industrial Engine Fuel Injection Pump
3608 Engine Piston and Connecting Rods - Remove
3608 Engine Piston and Connecting Rods - Install
G3520B Engine Product Description
G3520B Engine Specifications
C15 and C18 Petrolem Generator Set Engines Diagnostic Trouble Codes
G3520B Industrial Engines Sensor Signal (Analog, Passive) - Test
C9 Petroleum Engines Turbocharger
G3520B Engine Sensors and Electrical Components
C15 and C18 Petrolem Generator Set Engines Configuration Parameters
C15 and C18 Petrolem Generator Set Engines Component Location
2007/10/29 Improved Securing of the Wiring Harness {1408}
C175-16 Locomotive Engine Fuel Lines - Fuel Lines for the High Pressure Fuel Pump