Specifications
Show/hide table
Engine Specifications | ||
Item | E851 | E892 |
Cylinders and arrangement | 60 degree V 20 | |
Bore | |
|
Stroke | |
|
Total displacement | |
|
Compression ratio | 8:1 | 10:1 |
Aspiration | TA with SCAC (1) | |
Rotation (flywheel end) | Counterclockwise |
Show/hide table
(1) | Turbocharged Aftercooled with Separate Circuit Aftercooling |
Show/hide table
Illustration 1 | g00891058 |
G3520B Engine design (A) Inlet valves (B) Exhaust valves (C) Flywheel |
Caterpillar Information System:
G3520B Engine Product Description
3608 Engine Piston and Connecting Rods - Install
3608 Engine Piston and Connecting Rods - Remove
C3.3 Industrial Engine Engine Design
C3.3 Industrial Engine Cylinder Head Valves
3608 Engine Piston Cooling Jets - Remove and Install
C3.3 Industrial Engine Gear Group (Front)
C3.3 Industrial Engine Camshaft
3608 Engine Cylinder Liner - Remove
C3.3 Industrial Engine Rocker Shaft
C3.3 Industrial Engine Turbocharger
2008/10/06 A New Wire Harness for Marine Transmissions is Now Available {1408, 3030}
C15 and C18 Petrolem Generator Set Engines Diagnostic Trouble Codes
G3520B Industrial Engines Sensor Signal (Analog, Passive) - Test
C9 Petroleum Engines Turbocharger
G3520B Engine Sensors and Electrical Components
C15 and C18 Petrolem Generator Set Engines Configuration Parameters
C15 and C18 Petrolem Generator Set Engines Component Location
2007/10/29 Improved Securing of the Wiring Harness {1408}
C175-16 Locomotive Engine Fuel Lines - Fuel Lines for the High Pressure Fuel Pump
C27 and C32 Tier 4 Engines Flywheel Housing
C27 and C32 Industrial and Petroleum Engines Flywheel Housing
C27 and C32 Industrial and Petroleum Engines Flywheel Housing
G3520B Engine Refill Capacities and Recommendations