C3.3 Industrial Engine Caterpillar

Turbocharger

Usage:

C3.3 E3K

Show/hide table




Illustration 1	g00991357
Typical turbocharger

(1) Actuator rod

(2) Actuator

(3) Turbocharger

Tighten the nuts (4) to the following torque. ... 44 N·m (32 lb ft)

Tighten the bolt (5) to the following torque. ... 9 N·m (80 lb in)

Tighten the bolt (6) to the following torque. ... 22 N·m (16 lb ft)

The maximum test pressure for the wastegate ... 205 kPa (30 psi)

The movement for the rod actuator ... 1 mm (0.0394 inch)

Show/hide table

Table 1
Engine kW	The pressure for the wastegate
45⁽¹⁾	90 ± 3 kPa (13.0536 ± 0.4351 psi)
50⁽²⁾	108 ± 3 kPa (15.6643 ± 0.4351 psi)

Show/hide table

⁽¹⁾	TA
⁽²⁾	TA

Caterpillar Information System:

2008/10/06 A New Wire Harness for Marine Transmissions is Now Available {1408, 3030}

C3.3 Industrial Engine Alternator

C3.3 Industrial Engine Crankshaft Pulley

C3.3 Industrial Engine Crankshaft - Steel Crankshaft

C3.3 Industrial Engine Fuel Injection Pump

C3.3 Industrial Engine Fuel Injection Lines

3608 Engine Valve Lifter - Disassemble

3608 Engine Valve Mechanism - Remove

3608 Engine Cylinder Head - Assemble

3608 Engine Cylinder Head - Disassemble

3608 Engine Flywheel and Ring Gear - Remove and Install

EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490} EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}

C3.3 Industrial Engine Rocker Shaft

3608 Engine Cylinder Liner - Remove

C3.3 Industrial Engine Camshaft

C3.3 Industrial Engine Gear Group (Front)

3608 Engine Piston Cooling Jets - Remove and Install

C3.3 Industrial Engine Cylinder Head Valves

C3.3 Industrial Engine Engine Design

3608 Engine Piston and Connecting Rods - Remove

3608 Engine Piston and Connecting Rods - Install

G3520B Engine Product Description

G3520B Engine Specifications

C15 and C18 Petrolem Generator Set Engines Diagnostic Trouble Codes