D7E Track-Type Tractor Systems Caterpillar


Hydraulic Tank and Filter

Usage:

D7E HKA



Illustration 1g03741825

Table 1
Specification for 382-5955 Hydraulic Tank and Filter Gp    
Item     Qty     Part     Specification Description    
1     1     262-7312 Taperlock Stud     Torque to
35 ± 5 N·m (26 ± 4 lb ft).    
2     1     8T-0389 Locknut     Torque to
10.0 ± 1.5 N·m (88.5 ± 13.3 lb in).    
3     1     0L-0646 Spring     Length under test force is
66.68 mm (2.625 inch).
Test force is
42.75 to 47.25 N (9.61 to 10.62 lb).
Free length after test is
92.08 mm (3.625 inch).    
4     1     7B-3039 Spring     Length under test force is
26.2 mm (1.03 inch).
Test force is
14.32 to 16.81 N (3.22 to 3.78 lb).
Free length after test is
36.5 mm (1.44 inch).    
5     1     6V-7744 Locknut     Torque to
10.0 ± 1.5 N·m (88.5 ± 13.3 lb in).    
6     1     9J-7031 Drain Plug     Torque to
68 ± 7 N·m (50 ± 5 lb ft).    



Illustration 2g03742256

Table 2
Item     Qty     Part     Specification Description    
7     1     116-2810 Valve     Hand tighten the valve in order to compress the O-ring.    
8     3     118-7313 Bolt     Torque to
270 ± 40 N·m (199 ± 29 lb ft).    

Caterpillar Information System:

D7E Track-Type Tractor Systems Angling Bulldozer
D7E Track-Type Tractor Systems Oil Filter (Power Train)
D7E Track-Type Tractor Systems Equalizer Bar
335F Excavator Safety Messages
335F Excavator Engine Oil Sample - Obtain
335F Excavator Engine Oil and Filter - Change
C27 and C32 Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C27 and C32 Engines for Caterpillar Built Machines Cylinder Is Noisy
834K Wheel Dozer Diesel Exhaust Fluid Filter - Replace - Emission Related Component
2014/11/26 New Separate Circuit Vent Lines Check Valve Is Now Available on Certain D7E Track-Type Tractors {1377, 1380}
C27 and C32 Engines for Caterpillar Built Machines Crankcase Pressure Is High
D7E Track-Type Tractor Power Train Pivot Shaft - Remove and Install
D6T Track-Type Tractor Systems Piston Motor (Fan Drive)
D7E Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
926M, 930M and 938M Wheel Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
D7E Track-Type Tractor Systems Pilot Lines
926M, 930M and 938M Wheel Loaders Machine Systems Instrument Panel - Remove and Install
D7E Track-Type Tractor Systems Refrigerant Compressor
930K Wheel Loader Machine Systems Heating and Air Conditioning Unit - Remove and Install
Cat® Command for Dozing, Operator Console with RFID User Interface
C27 and C32 Engines for Caterpillar Built Machines Engine Does Not Crank
D7E Track-Type Tractor Systems Bulldozer Installation - Angle
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Disassemble
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.