Refrigerant Compressor
Show/hide table
 | |
| Illustration 1 | g03741916 |
Show/hide table
| Specification for 352-3960 Compressor Assembly | |||
|---|---|---|---|
| Item | Qty | Part | Specification description |
| 1 | - | - | Tighten the fitting to 21 ± 3 N·m (186 ± 27 lb in). |
| - | - | - | Displacement per revolution is 33 cc (2 cubic inch). Operating voltage is 8 to 16 VDC.. Maximum current is 31 amp. |
Caterpillar Information System:
926M, 930M and 938M Wheel Loaders Machine Systems Instrument Panel - Remove and Install
D7E Track-Type Tractor Systems Pilot Lines
926M, 930M and 938M Wheel Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
D7E Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
D6T Track-Type Tractor Systems Piston Motor (Fan Drive)
D7E Track-Type Tractor Systems Hydraulic Tank and Filter
D7E Track-Type Tractor Systems Angling Bulldozer
D7E Track-Type Tractor Systems Oil Filter (Power Train)
D7E Track-Type Tractor Systems Equalizer Bar
335F Excavator Safety Messages
335F Excavator Engine Oil Sample - Obtain
335F Excavator Engine Oil and Filter - Change
930K Wheel Loader Machine Systems Heating and Air Conditioning Unit - Remove and Install
Cat® Command for Dozing, Operator Console with RFID User Interface
C27 and C32 Engines for Caterpillar Built Machines Engine Does Not Crank
D7E Track-Type Tractor Systems Bulldozer Installation - Angle
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Disassemble
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Assemble
926M, 930M and 938M Wheel Loaders Machine Systems Loader Frame from Rear Frame - Separate
D7E Track-Type Tractor Power Train Idler - Remove and Install
D7E Track-Type Tractor Engine Supplement Water Pump - Remove and Install - Separate Circuit
D7E Track-Type Tractor Systems Window Wiper and Wiper Motor
926M, 930M and 938M Wheel Loaders Machine Systems Loader Frame to Rear Frame - Connect
D7E Track-Type Tractor Power Train Equalizer Bar - Remove and Install