D7E Track-Type Tractor Systems Caterpillar


Angling Bulldozer

Usage:

D7E SSH



Illustration 1g03741823

Table 1
Specification for 438-5375 Angling Bulldozer Ar    
Item     Qty     Part     Specification description    
1     2     295-8910 Pin     Diameter is 50.69 ± 0.02 mm (1.996 ± 0.001 inch).    
2     8     8T-5460 Bolt     Torque to
520 ± 70 N·m (384 ± 52 lb ft).    
3     2     369-8163 Pin     Diameter is
63.39 ± 0.02 mm (2.496 ± 0.001 inch).    
4     1     6Y-6752 Pin     Diameter is
63.50 ± 0.04 mm (2.500 ± 0.002 inch).    
5     2     8T-4779 Bolt     Torque to
270 ± 40 N·m (199 ± 30 lb ft).    
6     52     8E-5701 Shim     As required, use the following shims.

Thickness is
0.8 mm (0.03 inch).    
7     2     312-4474 Pin     Diameter is
50.22 ± 0.02 mm (1.977 ± 0.001 inch).    
8     4     7X-2532 Bolt     Torque to
520 ± 70 N·m (384 ± 52 lb ft).    
9     32     7X-2475 Bolt     Torque to
270 ± 40 N·m (199 ± 30 lb ft).    

Caterpillar Information System:

D7E Track-Type Tractor Systems Oil Filter (Power Train)
D7E Track-Type Tractor Systems Equalizer Bar
335F Excavator Safety Messages
335F Excavator Engine Oil Sample - Obtain
335F Excavator Engine Oil and Filter - Change
C27 and C32 Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C27 and C32 Engines for Caterpillar Built Machines Cylinder Is Noisy
834K Wheel Dozer Diesel Exhaust Fluid Filter - Replace - Emission Related Component
2014/11/26 New Separate Circuit Vent Lines Check Valve Is Now Available on Certain D7E Track-Type Tractors {1377, 1380}
C27 and C32 Engines for Caterpillar Built Machines Crankcase Pressure Is High
D7E Track-Type Tractor Power Train Pivot Shaft - Remove and Install
312F GC and 313F GC Excavators Machine Systems Boom Drift Reduction Valve
D7E Track-Type Tractor Systems Hydraulic Tank and Filter
D6T Track-Type Tractor Systems Piston Motor (Fan Drive)
D7E Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
926M, 930M and 938M Wheel Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
D7E Track-Type Tractor Systems Pilot Lines
926M, 930M and 938M Wheel Loaders Machine Systems Instrument Panel - Remove and Install
D7E Track-Type Tractor Systems Refrigerant Compressor
930K Wheel Loader Machine Systems Heating and Air Conditioning Unit - Remove and Install
Cat® Command for Dozing, Operator Console with RFID User Interface
C27 and C32 Engines for Caterpillar Built Machines Engine Does Not Crank
D7E Track-Type Tractor Systems Bulldozer Installation - Angle
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.