D7E Track-Type Tractor Systems Caterpillar


Bulldozer Installation - Angle

Usage:

D7E HKA



Illustration 1g03742005

Table 1
Specification for 442-7275 Bulldozer Installation Ar    
Item     Qty     Part     Specification description    
1     4     7X-2532 Bolt     Torque to
520 ± 70 N·m (384 ± 52 lb ft).    
2     52     8E-5701 Shim     As required, use the following shims.

Thickness is
0.8 mm (0.03 inch).    
3     2     312-4474 Pin     Diameter is
50.22 ± 0.02 mm (1.977 ± 0.001 inch).    
4     2     295-8910 Pin     Diameter is
50.69 ± 0.02 mm (1.996 ± 0.001 inch).    
5     8     8T-5460 Bolt     Torque to
520 ± 70 N·m (384 ± 52 lb ft).    
6     2     369-8163 Pin     Diameter is
63.39 ± 0.02 N·m (46.754 ± 0.015 lb ft).    
7     1     6Y-6752 Pin     Diameter is
63.50 ± 0.04 mm (2.500 ± 0.002 inch).    
8     2     8T-4779 Bolt     Torque to
270 ± 40 N·m (199 ± 30 lb ft).    

Caterpillar Information System:

C27 and C32 Engines for Caterpillar Built Machines Engine Does Not Crank
Cat® Command for Dozing, Operator Console with RFID User Interface
930K Wheel Loader Machine Systems Heating and Air Conditioning Unit - Remove and Install
D7E Track-Type Tractor Systems Refrigerant Compressor
926M, 930M and 938M Wheel Loaders Machine Systems Instrument Panel - Remove and Install
D7E Track-Type Tractor Systems Pilot Lines
926M, 930M and 938M Wheel Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
D7E Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
D6T Track-Type Tractor Systems Piston Motor (Fan Drive)
D7E Track-Type Tractor Systems Hydraulic Tank and Filter
D7E Track-Type Tractor Systems Angling Bulldozer
D7E Track-Type Tractor Systems Oil Filter (Power Train)
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Disassemble
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Assemble
926M, 930M and 938M Wheel Loaders Machine Systems Loader Frame from Rear Frame - Separate
D7E Track-Type Tractor Power Train Idler - Remove and Install
D7E Track-Type Tractor Engine Supplement Water Pump - Remove and Install - Separate Circuit
D7E Track-Type Tractor Systems Window Wiper and Wiper Motor
926M, 930M and 938M Wheel Loaders Machine Systems Loader Frame to Rear Frame - Connect
D7E Track-Type Tractor Power Train Equalizer Bar - Remove and Install
335F Excavator Stopping the Engine
335F Excavator Fuel Tank Shutoff and Drain Control
D7E Track-Type Tractor Systems Electric Drive Propulsion Module
D7E Track-Type Tractor Systems Control Manifold (Brake, Implement, Steering)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.