Oil Filter (Power Train)
Show/hide table
 | |
| Illustration 1 | g03741810 |
Show/hide table
| Specification for 295-0711 Oil Filter Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | - | 183-7264 Fluid Sampling Valve As | Torque to 11 to 13 N·m (97 to 115 lb in). |
| A | - | - | Minimum bottom clearance that is required to remove the oil filter group is 25.4 mm (1.00 inch). |
Caterpillar Information System:
D7E Track-Type Tractor Systems Equalizer Bar
335F Excavator Safety Messages
335F Excavator Engine Oil Sample - Obtain
335F Excavator Engine Oil and Filter - Change
C27 and C32 Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C27 and C32 Engines for Caterpillar Built Machines Cylinder Is Noisy
834K Wheel Dozer Diesel Exhaust Fluid Filter - Replace - Emission Related Component
2014/11/26 New Separate Circuit Vent Lines Check Valve Is Now Available on Certain D7E Track-Type Tractors {1377, 1380}
C27 and C32 Engines for Caterpillar Built Machines Crankcase Pressure Is High
D7E Track-Type Tractor Power Train Pivot Shaft - Remove and Install
312F GC and 313F GC Excavators Machine Systems Boom Drift Reduction Valve
D7E Track-Type Tractor Power Train Track Roller Frame - Remove and Install
D7E Track-Type Tractor Systems Angling Bulldozer
D7E Track-Type Tractor Systems Hydraulic Tank and Filter
D6T Track-Type Tractor Systems Piston Motor (Fan Drive)
D7E Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
926M, 930M and 938M Wheel Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
D7E Track-Type Tractor Systems Pilot Lines
926M, 930M and 938M Wheel Loaders Machine Systems Instrument Panel - Remove and Install
D7E Track-Type Tractor Systems Refrigerant Compressor
930K Wheel Loader Machine Systems Heating and Air Conditioning Unit - Remove and Install
Cat® Command for Dozing, Operator Console with RFID User Interface
C27 and C32 Engines for Caterpillar Built Machines Engine Does Not Crank
D7E Track-Type Tractor Systems Bulldozer Installation - Angle