Tilt Cylinder (Bulldozer)
Show/hide table
 | |
| Illustration 1 | g03741849 |
Show/hide table
| Specification for 390-9148 Bulldozer Tilt Cylinder | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 348-2350 Bushing | Before assembly, bore is 50.622 ± 0.013 mm (1.9929 ± 0.0005 inch). |
| 2 | 1 | 5J-5731 Locknut | Lubricate the threads and tighten to 3000 ± 300 N·m (2213 ± 221 lb ft). |
| A | 1 | 390-9149 Hydraulic Cylinder | Bore is 130.05 ± 0.10 mm (5.120 ± 0.004 inch). |
| B | 1 | 320-0928 Rod As | Diameter is 69.950 ± 0.038 mm (2.7539 ± 0.0015 inch). |
| C | 1 | 366-0774 Head | Bore over three lands is 70.53 ± 0.03 mm (2.777 ± 0.001 inch). |
| 3 | 1 | 8C-9200 Wear Ring | Before assembly, bore is 69.85 mm (2.750 inch). |
| 4 | 1 | 167-2235 Buffer Seal As | Lubricate sealing lip lightly with the lubricant that is being sealed. |
| 5 | 1 | 167-2299 U-Cup Seal | Lubricate sealing lip lightly with the lubricant that is being sealed. |
| 6 | 1 | 278-2324 Wiper Seal | Lubricate sealing lip lightly with the lubricant that is being sealed. |
| 7 | - | - | Before assembly, apply green Loctite Retaining Compound 620 to the wiper seal groove. |
Caterpillar Information System:
D6T Track-Type Tractor Systems Piston Motor (Fan Drive)
D7E Track-Type Tractor Systems Hydraulic Tank and Filter
D7E Track-Type Tractor Systems Angling Bulldozer
D7E Track-Type Tractor Systems Oil Filter (Power Train)
D7E Track-Type Tractor Systems Equalizer Bar
335F Excavator Safety Messages
335F Excavator Engine Oil Sample - Obtain
335F Excavator Engine Oil and Filter - Change
C27 and C32 Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C27 and C32 Engines for Caterpillar Built Machines Cylinder Is Noisy
834K Wheel Dozer Diesel Exhaust Fluid Filter - Replace - Emission Related Component
2014/11/26 New Separate Circuit Vent Lines Check Valve Is Now Available on Certain D7E Track-Type Tractors {1377, 1380}
926M, 930M and 938M Wheel Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
D7E Track-Type Tractor Systems Pilot Lines
926M, 930M and 938M Wheel Loaders Machine Systems Instrument Panel - Remove and Install
D7E Track-Type Tractor Systems Refrigerant Compressor
930K Wheel Loader Machine Systems Heating and Air Conditioning Unit - Remove and Install
Cat® Command for Dozing, Operator Console with RFID User Interface
C27 and C32 Engines for Caterpillar Built Machines Engine Does Not Crank
D7E Track-Type Tractor Systems Bulldozer Installation - Angle
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Disassemble
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Assemble
926M, 930M and 938M Wheel Loaders Machine Systems Loader Frame from Rear Frame - Separate
D7E Track-Type Tractor Power Train Idler - Remove and Install