Electrohydraulic Control (Joystick) - Remove and Install
Removal Procedure
- Remove cover (1) .
Show/hide table
 | |
| Illustration 1 | g02814981 |
- Remove bolt (2) .
Show/hide table
 | |
| Illustration 2 | g02814998 |
- Remove bolts (3) .
Show/hide table
 | |
| Illustration 3 | g02815002 |
- Remove bolt (4). Remove bolt (5) and move clip (6) out of the way.
Show/hide table
 | |
| Illustration 4 | g02815016 |
- Disconnect harness assemblies (7) .
Show/hide table
 | |
| Illustration 5 | g02815117 |
- Remove electrohydraulic control (8) and the bracket assembly as one.
- Remove locknuts (10) in order to separate bracket assembly (9) from electrohydraulic control (8) .
Show/hide table
 | |
| Illustration 6 | g02815138 |
Installation Procedure
- Install electrohydraulic control (8) in the reverse order of removal.
- Tighten locknuts (10) to a torque of 6 ± 1 N·m (53 ± 9 lb in).
Caterpillar Information System:
D7E Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
D6T Track-Type Tractor Systems Piston Motor (Fan Drive)
D7E Track-Type Tractor Systems Hydraulic Tank and Filter
D7E Track-Type Tractor Systems Angling Bulldozer
D7E Track-Type Tractor Systems Oil Filter (Power Train)
D7E Track-Type Tractor Systems Equalizer Bar
335F Excavator Safety Messages
335F Excavator Engine Oil Sample - Obtain
335F Excavator Engine Oil and Filter - Change
C27 and C32 Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
C27 and C32 Engines for Caterpillar Built Machines Cylinder Is Noisy
834K Wheel Dozer Diesel Exhaust Fluid Filter - Replace - Emission Related Component
D7E Track-Type Tractor Systems Pilot Lines
926M, 930M and 938M Wheel Loaders Machine Systems Instrument Panel - Remove and Install
D7E Track-Type Tractor Systems Refrigerant Compressor
930K Wheel Loader Machine Systems Heating and Air Conditioning Unit - Remove and Install
Cat® Command for Dozing, Operator Console with RFID User Interface
C27 and C32 Engines for Caterpillar Built Machines Engine Does Not Crank
D7E Track-Type Tractor Systems Bulldozer Installation - Angle
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Disassemble
926M, 930M and 938M Wheel Loaders Machine Systems Heating and Air Conditioning Unit - Assemble
926M, 930M and 938M Wheel Loaders Machine Systems Loader Frame from Rear Frame - Separate
D7E Track-Type Tractor Power Train Idler - Remove and Install
D7E Track-Type Tractor Engine Supplement Water Pump - Remove and Install - Separate Circuit