Air Conditioner
Show/hide table
Illustration 1 | g03738318 |
Show/hide table
Specification for 344-9597 Heater and Air Conditioner Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 14     | 113-8694 Bolt     | Torque to 6 ± 1 N·m (53 ± 9 lb in).     |
Caterpillar Information System:
926M, 930M and 938M Wheel Loaders Power Train Tire and Rim - Remove and Install
2014/11/03 New Replacement Parts for the Torque Converter Are Now Used on Certain Large Wheel Loaders, Wheel Dozers, and Landfill Compactors {3101, 3105}
C27 and C32 Engines for Caterpillar Built Machines Data Link Configuration Status - Test
621K Wheel Tractor-Scraper Sound Information and Vibration Information
D7E Track-Type Tractor Systems Air Conditioner
C27 and C32 Engines for Caterpillar Built Machines Data Link - Test
Throttle Pedal Sensor Calibration{1269, 1913, 5736, 5737, 7610, 7620} Throttle Pedal Sensor Calibration{1269, 1913, 5736, 5737, 7610, 7620}
C27 and C32 Engines for Caterpillar Built Machines Cooling Fan Reversing - Test
D6R2 Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Manifold - Remove and Install - Hydrostatic
926M, 930M and 938M Wheel Loaders Power Train Accumulator - Remove and Install - Hydrostatic
D6R2 Track-Type Tractor Engine Supplement Electric Starting Motor - Remove and Install
Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357} Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357}
D6R2 Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
D6R2 Track-Type Tractor Engine Supplement Fan - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
C27 and C32 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
D7R Track-Type Bulldozer Cooling System Coolant Sample (Level 1) - Obtain
D7R Track-Type Bulldozer Engine Oil Sample - Obtain
926M, 930M and 938M Wheel Loaders Power Train Drive Shaft - Remove and Install
D7R Track-Type Bulldozer Winch Fairlead Rollers - Lubricate - If Equipped
D7R Track-Type Bulldozer Fuel Tank Water and Sediment - Drain
335F CR Excavator C7.1 Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
926M, 930M and 938M Wheel Loaders Power Train Fixed Axle (Front) - Remove and Install