Fan - Remove and Install
Removal Procedure
Start By:
- Remove the engine side guards.
- Remove bolts (1) and (2). Remove guards (3) .
Show/hide table
 | |
| Illustration 1 | g03738443 |
- Remove bolts (5) and shield assembly (4).
Show/hide table
 | |
| Illustration 2 | g03738481 |
- Repeat Step 2 for the shield assembly below.
- Remove bolts (7). Use two people to remove fan assembly (6). The weight fan assembly (6) is approximately 32 (70 lbs).
Show/hide table
 | |
| Illustration 3 | g03738495 |
- Remove bolts (9). Separate adapter (10) from fan (8) .
Show/hide table
 | |
| Illustration 4 | g03738503 |
Installation Procedure
- Install fan (8) in the reverse order of removal.
Caterpillar Information System:
D6R2 Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357} Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357}
D7E Track-Type Tractor Systems Air Conditioner
926M, 930M and 938M Wheel Loaders Power Train Tire and Rim - Remove and Install
2014/11/03 New Replacement Parts for the Torque Converter Are Now Used on Certain Large Wheel Loaders, Wheel Dozers, and Landfill Compactors {3101, 3105}
C27 and C32 Engines for Caterpillar Built Machines Data Link Configuration Status - Test
621K Wheel Tractor-Scraper Sound Information and Vibration Information
D7E Track-Type Tractor Systems Air Conditioner
C27 and C32 Engines for Caterpillar Built Machines Data Link - Test
Throttle Pedal Sensor Calibration{1269, 1913, 5736, 5737, 7610, 7620} Throttle Pedal Sensor Calibration{1269, 1913, 5736, 5737, 7610, 7620}
C27 and C32 Engines for Caterpillar Built Machines Cooling Fan Reversing - Test
D6R2 Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
C27 and C32 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
D7R Track-Type Bulldozer Cooling System Coolant Sample (Level 1) - Obtain
D7R Track-Type Bulldozer Engine Oil Sample - Obtain
926M, 930M and 938M Wheel Loaders Power Train Drive Shaft - Remove and Install
D7R Track-Type Bulldozer Winch Fairlead Rollers - Lubricate - If Equipped
D7R Track-Type Bulldozer Fuel Tank Water and Sediment - Drain
335F CR Excavator C7.1 Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
926M, 930M and 938M Wheel Loaders Power Train Fixed Axle (Front) - Remove and Install
2014/12/09 An Improved SystemOne Self Cleaning Track Shoe is Now Available for Certain D6N and D6M Track-Type Tractors {4170}
D6R2 Track-Type Tractor Engine Supplement Fan Drive - Remove and Install
D7R Track-Type Bulldozer Fuel System - Prime