Fan Drive - Remove and Install
Removal Procedure
Start By:
- Remove the fan.
- Remove belts (1) from fan drive (2). Remove pulley (3) from fan drive (2) .
Show/hide table
Illustration 1 | g00852585 |
- Remove bolts (4) from fan drive (2). Remove fan drive (2) .
Show/hide table
Illustration 2 | g00852586 |
Installation Procedure
- Install fan drive (2) in the reverse order of removal.
Caterpillar Information System:
2014/12/09 An Improved SystemOne Self Cleaning Track Shoe is Now Available for Certain D6N and D6M Track-Type Tractors {4170}
926M, 930M and 938M Wheel Loaders Power Train Fixed Axle (Front) - Remove and Install
335F CR Excavator C7.1 Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
D7R Track-Type Bulldozer Fuel Tank Water and Sediment - Drain
D7R Track-Type Bulldozer Winch Fairlead Rollers - Lubricate - If Equipped
926M, 930M and 938M Wheel Loaders Power Train Drive Shaft - Remove and Install
D7R Track-Type Bulldozer Engine Oil Sample - Obtain
D7R Track-Type Bulldozer Cooling System Coolant Sample (Level 1) - Obtain
C27 and C32 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
C27 and C32 Engines for Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
D6R2 Track-Type Tractor Engine Supplement Fan - Remove and Install
D6R2 Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
D7R Track-Type Bulldozer Fuel System - Prime
2014/10/27 Improved Solenoid Valve Group Is Now Used On Certain Load Haul Dumps and Wheel Loaders {3073, 3139, 5479}
335F CR Excavator C7.1 Engine Supplement Turbocharger - Remove and Install
D7E Track-Type Tractor Systems Bank Valve (Two)
D7E Track-Type Tractor Systems Bank Valve (Two)
D7E Track-Type Tractor Systems Bulldozer Brace
D7E Track-Type Tractor Systems Bulldozer Trunnion
D7E Track-Type Tractor Systems Push Arm
D7E Track-Type Tractor Systems Control Valve (Bulldozer Lift)
D7E Track-Type Tractor Systems Track Roller Frame
2014/10/27 An Improved Installation Procedure for the Injector Top O-Ring Seal on C27 and C32 Machine Engines {1251, 1254, 1290, 1713}
926M, 930M and 938M Wheel Loaders Power Train Duo-Cone Conventional Seals