926M, 930M and 938M Wheel Loaders Power Train Caterpillar


Fixed Axle (Front) - Remove and Install

Usage:

930M HEY

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
6V-6146  Load Leveler Gp 

Start By:

  1. Remove the front wheels.

  2. Remove the parking brake.

  1. Drain the fixed axle (front) oil. Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil - Change" for the correct draining and filling procedure.


    Illustration 1g02862236

  2. Disconnect hose assembly (1).


    Illustration 2g03738674
    Typical Example


    Illustration 3g03738698

  3. Attach Tooling (A) and a suitable lifting device to front axle (2). The weight of front axle (2) is approximately 590 kg (1300 lb).


    Illustration 4g03738678

  4. Remove bolts (3) and remove front axle (2).

Installation Procedure

  1. Install fixed axle (2) in the reverse order of removal.

Caterpillar Information System:

335F CR Excavator C7.1 Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
D7R Track-Type Bulldozer Fuel Tank Water and Sediment - Drain
D7R Track-Type Bulldozer Winch Fairlead Rollers - Lubricate - If Equipped
926M, 930M and 938M Wheel Loaders Power Train Drive Shaft - Remove and Install
D7R Track-Type Bulldozer Engine Oil Sample - Obtain
D7R Track-Type Bulldozer Cooling System Coolant Sample (Level 1) - Obtain
C27 and C32 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
C27 and C32 Engines for Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
D6R2 Track-Type Tractor Engine Supplement Fan - Remove and Install
D6R2 Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357} Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357}
D7E Track-Type Tractor Systems Air Conditioner
2014/12/09 An Improved SystemOne Self Cleaning Track Shoe is Now Available for Certain D6N and D6M Track-Type Tractors {4170}
D6R2 Track-Type Tractor Engine Supplement Fan Drive - Remove and Install
D7R Track-Type Bulldozer Fuel System - Prime
2014/10/27 Improved Solenoid Valve Group Is Now Used On Certain Load Haul Dumps and Wheel Loaders {3073, 3139, 5479}
335F CR Excavator C7.1 Engine Supplement Turbocharger - Remove and Install
D7E Track-Type Tractor Systems Bank Valve (Two)
D7E Track-Type Tractor Systems Bank Valve (Two)
D7E Track-Type Tractor Systems Bulldozer Brace
D7E Track-Type Tractor Systems Bulldozer Trunnion
D7E Track-Type Tractor Systems Push Arm
D7E Track-Type Tractor Systems Control Valve (Bulldozer Lift)
D7E Track-Type Tractor Systems Track Roller Frame
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.