2014/12/09 Caterpillar


An Improved SystemOne Self Cleaning Track Shoe is Now Available for Certain D6N and D6M Track-Type Tractors {4170}

Usage:

D6M 2RN
Track-Type Tractor:
D6M (S/N: 2RN1-UP; 4JN1-UP; 5NR1-UP; 4GS1-UP)
D6N (S/N: PBA1-UP; CCG1-UP; ALR1-UP; CCS1-UP; GHS1-UP; ALY1-UP; DJY1-UP)

Description of Change: The self cleaning shoe for D6M and D6N has been improved. This shoe is sometimes referred to as an APEX track shoe due to the angular shaped sides of the shoe. Geometry changes to the shoe improves cracking resistance and increases service life.

The new 424-3498 Track Shoe only applies to D6M LGP and D6N LGP tractors with SystemOne undercarriage. This shoe will not work for D6M and D6N XL tractors. The former 241-7871 Track Shoe is canceled and replaced by the new 424-3498 Track Shoe. The new self cleaning shoe will retrofit onto any D6M LPG or D6N LGP SystemOne track with self cleaning shoes. Table 1 shows the new and former shoe part numbers.

For current factory built machines, self cleaning track shoes are now only offered with the Heavy Duty undercarriage option. The self cleaning shoe for Heavy Duty track is a different part number than the self cleaning shoe for SystemOne track. The new 424-3498 Track Shoe is only available through the parts system.

Table 1
Required Parts    
Qty     Part Number     Description     Former Part Number    
1     424-3498     Track Shoe     241-7871    

Caterpillar Information System:

926M, 930M and 938M Wheel Loaders Power Train Fixed Axle (Front) - Remove and Install
335F CR Excavator C7.1 Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
D7R Track-Type Bulldozer Fuel Tank Water and Sediment - Drain
D7R Track-Type Bulldozer Winch Fairlead Rollers - Lubricate - If Equipped
926M, 930M and 938M Wheel Loaders Power Train Drive Shaft - Remove and Install
D7R Track-Type Bulldozer Engine Oil Sample - Obtain
D7R Track-Type Bulldozer Cooling System Coolant Sample (Level 1) - Obtain
C27 and C32 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
C27 and C32 Engines for Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
D6R2 Track-Type Tractor Engine Supplement Fan - Remove and Install
D6R2 Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357} Procedure For Updating A 3 Bank Implement Hydraulic System To A 4 Bank Implement Hydraulic System {5051, 5057, 5161, 5170, 5357}
D6R2 Track-Type Tractor Engine Supplement Fan Drive - Remove and Install
D7R Track-Type Bulldozer Fuel System - Prime
2014/10/27 Improved Solenoid Valve Group Is Now Used On Certain Load Haul Dumps and Wheel Loaders {3073, 3139, 5479}
335F CR Excavator C7.1 Engine Supplement Turbocharger - Remove and Install
D7E Track-Type Tractor Systems Bank Valve (Two)
D7E Track-Type Tractor Systems Bank Valve (Two)
D7E Track-Type Tractor Systems Bulldozer Brace
D7E Track-Type Tractor Systems Bulldozer Trunnion
D7E Track-Type Tractor Systems Push Arm
D7E Track-Type Tractor Systems Control Valve (Bulldozer Lift)
D7E Track-Type Tractor Systems Track Roller Frame
2014/10/27 An Improved Installation Procedure for the Injector Top O-Ring Seal on C27 and C32 Machine Engines {1251, 1254, 1290, 1713}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.