Crankcase Guard - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-7505     | Hydraulic Jack     | 1     |
- Position Tooling (A) under crankcase guard (1). The weight of crankcase guard (1) is approximately 680 kg (150 lb).
Show/hide table
Illustration 1 | g01105907 |
- Remove bolts (2). Use Tooling (A) in order to remove crankcase guard (1) .
Installation Procedure
- Install crankcase guard (1) in the reverse order of removal.
Caterpillar Information System:
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Gear Pump (Axle Oil Cooler) - Remove and Install
980H Wheel Loader Engine Supplement Engine Oil Pan - Remove and Install - In Chassis
901C, 902C and 903C Compact Wheel Loaders PowerTrain Differential (Limited Slip) - Remove
621K, 623K and 627K Wheel Tractor-Scrapers GPS Receiver Has Incorrect Indicators
966M and 972M Wheel Loaders Automatic Lubrication System - If Equipped
966M and 972M Wheel Loaders Camera
312F and 313F Excavators Monitoring System
D10T2 Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Fixed Axle (Front) - Install
844K Wheel Dozer Operator Controls
D10T2 Track-Type Tractor Engine Supplement Fuel Cooler - Remove and Install
980H Wheel Loader Power Train Power Train Guard (Transmission) - Remove and Install
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Hood - Front
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Carrier Bearing (Drive Shaft) - Remove and Install
D10T2 Track-Type Tractor Engine Supplement Exhaust Cooler (NRS) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Assemble
D9T Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070} Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070}
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Battery and Wiring Group
349F and 352F Excavators ECM - Replace
966H and 972H Wheel Loaders PowerTrain Oscillating Axle (Rear) - Remove and Install
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Drive Shaft (Center) - Remove and Install