D10T2 Track-Type Tractor Engine Supplement Caterpillar


Exhaust Cooler (NRS) - Remove and Install

Usage:

D10T2 JJW

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     207-1601     橡胶润滑剂     1    

开始:

  1. 拆下发动机侧护罩。

  1. 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"以了解正确的排放和加注步骤。



    图 1g03423819

  1. 卸下护罩 (1) 。



    图 2g03423822

  1. 断开管 (2) 。



    图 3g03423847

    出于照片清晰度考虑,拆下了发动机。

  1. 拆下支架 (3) 。



    图 4g03423830



    图 5g03423835

  1. 拆下卡箍 (4) 和 (6) 并弃置。 拆下波纹管 (5) 并弃置。 拆下排气冷却器 (7) 。

安装步骤

  1. 按与拆卸相反的顺序安装排气冷却器 (7) 。

    1. 将一薄层工具 (A) 涂抹到管 (2) 的孔和 O 形密封圈上。

    1. 将卡箍组件 (4) 拧紧至扭矩为 7.5 ± 1 N·m (66 ± 9 lb in)。

Caterpillar Information System:

980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Carrier Bearing (Drive Shaft) - Remove and Install
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Hood - Front
980H Wheel Loader Power Train Power Train Guard (Transmission) - Remove and Install
980H Wheel Loader Power Train Crankcase Guard - Remove and Install
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Gear Pump (Axle Oil Cooler) - Remove and Install
980H Wheel Loader Engine Supplement Engine Oil Pan - Remove and Install - In Chassis
901C, 902C and 903C Compact Wheel Loaders PowerTrain Differential (Limited Slip) - Remove
621K, 623K and 627K Wheel Tractor-Scrapers GPS Receiver Has Incorrect Indicators
966M and 972M Wheel Loaders Automatic Lubrication System - If Equipped
966M and 972M Wheel Loaders Camera
312F and 313F Excavators Monitoring System
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Assemble
D9T Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070} Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070}
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Battery and Wiring Group
349F and 352F Excavators ECM - Replace
966H and 972H Wheel Loaders PowerTrain Oscillating Axle (Rear) - Remove and Install
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Drive Shaft (Center) - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Power Train Sequence Valve - Test and Adjust
966H and 972H Wheel Loaders PowerTrain Fixed Axle (Front) - Remove and Install
980H Wheel Loader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Fuel Tank - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.