Battery and Wiring Group
Show/hide table
| |
| Illustration 1 | g03423900 |
Show/hide table
| Specification for 374-8720 Battery and Wiring GP | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 292-1250 Plug | Apply purple Loctite 545 to the threads.
Final installation torque is |
| 2 | 2 | 8T-4192 Bolt | Torque to |
| 3 | 2 | 8T-0389 Locknut | Final installation torque is |
| 4 | 2 | 344-5675 Nut | Torque to |
| 5 | 2 | 5C-9553 Bolt | Torque to |
| 6 | 1 | 365-6362 Cable As | Torque to |
| 7 | 2 | 170-6929 Cable As | Torque to |
| 8 | 1 | 374-8721 Cable As | Torque to |
| 9 | - | - | Torque to |
Caterpillar Information System:
Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070} Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070}
D9T Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Assemble
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
D10T2 Track-Type Tractor Engine Supplement Exhaust Cooler (NRS) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Carrier Bearing (Drive Shaft) - Remove and Install
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Hood - Front
980H Wheel Loader Power Train Power Train Guard (Transmission) - Remove and Install
980H Wheel Loader Power Train Crankcase Guard - Remove and Install
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Gear Pump (Axle Oil Cooler) - Remove and Install
980H Wheel Loader Engine Supplement Engine Oil Pan - Remove and Install - In Chassis
349F and 352F Excavators ECM - Replace
966H and 972H Wheel Loaders PowerTrain Oscillating Axle (Rear) - Remove and Install
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Drive Shaft (Center) - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Power Train Sequence Valve - Test and Adjust
966H and 972H Wheel Loaders PowerTrain Fixed Axle (Front) - Remove and Install
980H Wheel Loader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Fuel Tank - Remove and Install
2013/08/26 New Software Is Now Used on Certain Medium Wheel Loaders {7610, 7620}
966H and 972H Wheel Loaders PowerTrain Heat Exchanger (Axle Oil Cooler) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Modulating Valve (Transmission Clutch) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Differential and Bevel Gear - Remove and Install