Oscillating Axle (Rear) - Remove and Install
Specifications
Show/hide table
Illustration 1 | g03356041 |
Right side view of machine |
Show/hide table
Item     | Qty     | Part     | Specification Description     |
3     | 8     | 112-1533 Bolt     | Torque to 1000 ± 125 N·m (738 ± 92 lb ft).     |
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Description     | Part Number     | Qty     |
A     | 6V-6146     | Load Leveler Gp     | 1     |
189-0412 | Clevis     | 1     | |
189-0863 | Shackle As     | 2     | |
B     | 366-6003     | Handler As     | 1     |
Start By:
- Remove the rear tires and rims.
- Remove the rear drive shaft.
- Disconnect harness assembly (1). Cut cable strap (2) .
Show/hide table
Illustration 2 | g03365291 |
- Disconnect clip (3) .
Show/hide table
Illustration 3 | g03365298 |
- Disconnect hose assemblies (4) .
Show/hide table
Illustration 4 | g03365301 |
- Disconnect tube assembly (5) .
Show/hide table
Illustration 5 | g03365303 |
- Disconnect tube assembly (6) .
Show/hide table
Illustration 6 | g03365304 |
- Attach Tooling (A) and a suitable lifting device to the oscillating axle. The weight of the oscillating axle is approximately 1635 kg (3600 lb).
Show/hide table
Illustration 7 | g03365307 |
- Remove bolts (7). Repeat this step for the opposite side.
Show/hide table
Illustration 8 | g03365351 |
- Remove bolts (8) and remove bolts (9) .
Show/hide table
Illustration 9 | g03365356 |
- Use Tooling (A) and the suitable lifting device in order to lower oscillating axle (10) onto Tooling (B). Remove the suitable lifting device from oscillating axle (10). Use Tooling (B) in order to move oscillating axle (10) from under the machine.
Show/hide table
Illustration 10 | g03365307 |
Show/hide table
Illustration 11 | g03365508 |
Installation Procedure
- Install oscillating axle (10) in the reverse order of removal.
- Tighten bolts (7), (8), and (9) to a torque of 1000 ± 125 N·m (738 ± 92 lb ft). Tighten bolts (7), (8), and (9) an additional 120° ± 10°.
Caterpillar Information System:
349F and 352F Excavators ECM - Replace
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Battery and Wiring Group
Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070} Installation Procedure for the 422-3309 Valve Kit (High Flow) {5070}
D9T Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Assemble
PL83 and PL87 Pipelayers Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
D10T2 Track-Type Tractor Engine Supplement Exhaust Cooler (NRS) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Carrier Bearing (Drive Shaft) - Remove and Install
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Hood - Front
980H Wheel Loader Power Train Power Train Guard (Transmission) - Remove and Install
980H Wheel Loader Power Train Crankcase Guard - Remove and Install
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Drive Shaft (Center) - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Power Train Sequence Valve - Test and Adjust
966H and 972H Wheel Loaders PowerTrain Fixed Axle (Front) - Remove and Install
980H Wheel Loader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Fuel Tank - Remove and Install
2013/08/26 New Software Is Now Used on Certain Medium Wheel Loaders {7610, 7620}
966H and 972H Wheel Loaders PowerTrain Heat Exchanger (Axle Oil Cooler) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Modulating Valve (Transmission Clutch) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Differential and Bevel Gear - Remove and Install
966H and 972H Wheel Loaders PowerTrain Service Brakes - Remove and Install
C7.1 Industrial Engine Battery - Replace