Brake Control Valve (Service) - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | FT-2674 | Vacuum Cap | 1 |
Start By:
- Connect the steering frame lock.
- Release the hydraulic system pressure.
Show/hide table
 |
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
 |
- Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Show/hide table
 | |
| Illustration 1 | g02624263 |
- Disconnect hose assemblies (1) .
Show/hide table
 | |
| Illustration 2 | g02625096 |
- Remove nuts (2) and brake control valve (3) .
Installation Procedure
- Install brake control valve (3) in the reverse order of removal.
Caterpillar Information System:
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Machine Inclination Sensing Device - Calibrate
994H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
Cat® Detect Object Detection System MID 134 - CID 3318 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3319 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3322 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3323 - FMI 11
Installation Procedure for 368-8120 Hydraulic Ar for 963D Track-Type Loaders{1408, 5057, 5133, 6129} Installation Procedure for 368-8120 Hydraulic Ar for 963D Track-Type Loaders{1408, 5057, 5133, 6129}
2011/06/27 An Improved Relay is Now Used on Certain Cat Products {4493}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Access Doors and Covers
XQ400 Power Module Spark Plugs - Inspect/Adjust/Replace - Spark Plugs with Adjustable Electrode Gaps
Rework Procedure for 3E-5184 Secondary Steering Electronic Control Module {4348} Rework Procedure for 3E-5184 Secondary Steering Electronic Control Module {4348}
854K Wheel Dozer and 992K Wheel Loader C32 Engine Supplement Transmission Oil Cooler Core - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Refrigerant Compressor
950K and 962K Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Remove and Install
950K and 962K Wheel Loaders C7.1 Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Engine Oil Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fuel Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Boost Pressure Sensor
950K and 962K Wheel Loaders C7.1 Engine Supplement Flame Detection Temperature Sensor - Remove and Install - Flame Detection Temperature Sensor for the Combustion Head
910K and 914K Compact Wheel Loaders Battery or Battery Cable - Inspect/Replace
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control Module
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Solenoid Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Relief Valve (Differential Lock)