D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Caterpillar


Refrigerant Compressor

Usage:

D3K2 LGP GAE

Specifications




Illustration 1g02766876

Table 1
Specification for 178-9570 Refrigerant Compressor Gp    
Item     Qty     Part     Specification Description    
1     1     7T-4532 Plug As     Note: Oil Plug is Pressurized
Torque to
19.6 ± 4.9 N·m (173.5 ± 43.4 lb in).    

Removal Procedure

Start By:

  1. Remove the engine enclosure.

Note: Plug and cap all open ports, hose assemblies, and tube assemblies.

------ WARNING! ------

Personal injury can result from contact with refrigerant.

Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

Personal injury or death can result from inhaling refrigerant through a lit cigarette.

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.

----------------------

  1. Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG2500, "Air Conditioning Tools" for the correct tools.



    Illustration 2g01353234

  1. Disconnect clip (2). Remove plate (1) .



    Illustration 3g01353727

  1. Release tension on belt (3) and disconnect belt (3). Refer to Disassembly and Assembly, "Alternator" for removing belt (3) .

  1. Disconnect harness assembly (4). Disconnect hose assemblies (5) and remove bolts (6) .

  1. Remove refrigerant compressor (7) .

Installation Procedure

  1. Install refrigerant compressor (7) in reverse order of the removal.

Caterpillar Information System:

854K Wheel Dozer and 992K Wheel Loader C32 Engine Supplement Transmission Oil Cooler Core - Remove and Install
950K and 962K Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Machine Inclination Sensing Device - Calibrate
994H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
Cat® Detect Object Detection System MID 134 - CID 3318 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3319 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3322 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3323 - FMI 11
Installation Procedure for 368-8120 Hydraulic Ar for 963D Track-Type Loaders{1408, 5057, 5133, 6129} Installation Procedure for 368-8120 Hydraulic Ar for 963D Track-Type Loaders{1408, 5057, 5133, 6129}
2011/06/27 An Improved Relay is Now Used on Certain Cat Products {4493}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Access Doors and Covers
950K and 962K Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Remove and Install
950K and 962K Wheel Loaders C7.1 Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Engine Oil Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fuel Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Boost Pressure Sensor
950K and 962K Wheel Loaders C7.1 Engine Supplement Flame Detection Temperature Sensor - Remove and Install - Flame Detection Temperature Sensor for the Combustion Head
910K and 914K Compact Wheel Loaders Battery or Battery Cable - Inspect/Replace
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control Module
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Solenoid Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Relief Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Pressure Reducing Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Diverter Valve (Differential Lock)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.