D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Caterpillar


Engine Oil Pressure Sensor

Usage:

D3K2 LGP GAE

Specifications




Illustration 1g02150747

Typical example

Table 1
Specifications for 320-3060 Pressure Sensor    
Callout     Part Number     Part Name     Specification Description    
1     320-3060     Pressure Sensor     Torque to...................
10 ± 2 N·m (89 ± 18 lb in)
   

Removal Procedure

Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-6396     O-Ring Assembly Compound     1    

Start By:

  1. Open the engine compartment door on the left side of the machine.
  2. Remove the engine side guard.



    Illustration 2g02879637

  1. Disconnect harness assembly (2) from engine oil pressure sensor (1) .

  1. Remove engine oil pressure sensor (1) .

  1. Remove O-ring seal (3) from engine oil pressure sensor (1) .

Installation Procedure

  1. Install engine oil pressure sensor (1) in the reverse order of removal.

    1. Apply Tooling (A) to new O-ring seal (3).

    1. The torque for engine pressure sensor (1) is 10 ± 2 N·m (89 ± 18 lb in).

Caterpillar Information System:

950K and 962K Wheel Loaders C7.1 Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
950K and 962K Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Refrigerant Compressor
854K Wheel Dozer and 992K Wheel Loader C32 Engine Supplement Transmission Oil Cooler Core - Remove and Install
950K and 962K Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Machine Inclination Sensing Device - Calibrate
994H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
Cat® Detect Object Detection System MID 134 - CID 3318 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3319 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3322 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3323 - FMI 11
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fuel Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Boost Pressure Sensor
950K and 962K Wheel Loaders C7.1 Engine Supplement Flame Detection Temperature Sensor - Remove and Install - Flame Detection Temperature Sensor for the Combustion Head
910K and 914K Compact Wheel Loaders Battery or Battery Cable - Inspect/Replace
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control Module
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Solenoid Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Relief Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Pressure Reducing Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Diverter Valve (Differential Lock)
950K and 962K Wheel Loaders C7.1 Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0874 - FMI 03
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0875 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.