Flame Detection Temperature Sensor - Remove and Install - Flame Detection Temperature Sensor for the Combustion Head
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-0325     | Crowfoot Wrench     | 1     |
B     | -     | Bostik Pure Nickel Anti-Seize Compound     |
1     |
- Open the hood.
- Cut cable straps (1) from harness assembly (2) .
Note: Ensure that all cable straps are removed from the harness assemblies.
Show/hide table
Illustration 1 | g02625498 |
- Slide locking tab (4) into the unlocked position. Disconnect harness assembly (3) .
- Use Tooling (A) in order to remove flame detection temperature sensor (5).
Show/hide table
Illustration 2 | g02625499 |
- If necessary, remove temperature sensor (DPF) for the Diesel Particulate Filter (DPF).
Installation Procedure
- Install flame detection temperature sensor (5) in the reverse order of removal.
- Use Tooling (B) in order to lubricate the threads of flame detection temperature sensor (5) .
- Use Tooling (A) in order to tighten flame detection temperature sensor (5) to a torque of 45 N·m (33 lb ft).
Caterpillar Information System:
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Boost Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fuel Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Engine Oil Pressure Sensor
950K and 962K Wheel Loaders C7.1 Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
950K and 962K Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Refrigerant Compressor
854K Wheel Dozer and 992K Wheel Loader C32 Engine Supplement Transmission Oil Cooler Core - Remove and Install
950K and 962K Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Machine Inclination Sensing Device - Calibrate
994H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
Cat® Detect Object Detection System MID 134 - CID 3318 - FMI 11
910K and 914K Compact Wheel Loaders Battery or Battery Cable - Inspect/Replace
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control Module
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Solenoid Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Relief Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Pressure Reducing Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Diverter Valve (Differential Lock)
950K and 962K Wheel Loaders C7.1 Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0874 - FMI 03
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0875 - FMI 03
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0875 - FMI 04
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 2114 - FMI 04
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0880 - FMI 08