Boost Pressure Sensor
Specifications
Show/hide table
 | |
| Illustration 1 | g02150750 |
Show/hide table
 | |
| Illustration 2 | g01332534 |
Typical example | |
Show/hide table
| Specifications for 320-3062 Pressure Sensor Gp | |||
| Callout | Part Number | Part Name | Specification Description |
| 1 | 320-3062 | Pressure Sensor Gp | Torque to................... 10 N·m (89 lb in) |
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-6396 | O-Ring Assembly Compound | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Open the left side engine enclosure.
- Slide the locking tab into the unlocked position.
Show/hide table
 | |
| Illustration 3 | g02749173 |
- Disconnect harness assembly (1) .
Note: The boost pressure sensor has a three-wire plug.
- Remove boost pressure sensor (2) and the O-ring seal.
Show/hide table
 | |
| Illustration 4 | g02749237 |
Installation Procedure
- Install boost pressure sensor (2) in the reverse order of removal.
- Lubricate the new O-ring seal with Tooling (A) .
- Tighten the boost pressure sensor to a torque of 10 N·m (89 lb in).
Caterpillar Information System:
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fuel Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Engine Oil Pressure Sensor
950K and 962K Wheel Loaders C7.1 Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
950K and 962K Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Refrigerant Compressor
854K Wheel Dozer and 992K Wheel Loader C32 Engine Supplement Transmission Oil Cooler Core - Remove and Install
950K and 962K Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Machine Inclination Sensing Device - Calibrate
994H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
Cat® Detect Object Detection System MID 134 - CID 3318 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3319 - FMI 11
950K and 962K Wheel Loaders C7.1 Engine Supplement Flame Detection Temperature Sensor - Remove and Install - Flame Detection Temperature Sensor for the Combustion Head
910K and 914K Compact Wheel Loaders Battery or Battery Cable - Inspect/Replace
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control Module
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Solenoid Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Relief Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Pressure Reducing Valve (Differential Lock)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Diverter Valve (Differential Lock)
950K and 962K Wheel Loaders C7.1 Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0874 - FMI 03
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0875 - FMI 03
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 0875 - FMI 04
D6T Track-Type Tractor Electronic Control Systems MID 082 - CID 2114 - FMI 04