Machine Inclination Sensing Device - Calibrate
Show/hide table
 | |
| Illustration 1 | g02618978 |
Caterpillar Electronic Technician | |
- Use Caterpillar Electronic Technician (Cat ET) in order to access the Machine Inclination Sensing Device Calibration.
- Connect a laptop to the machine. A communication adapter must be used. The laptop must have the latest Cat ET software version. Refer to the "Service Tools" section of this document.
- Select "Implement" ECM.
- Press "OK".
- Go to "Service".
- Select "Calibrations".
- Select "Machine Inclination Sensing Device Calibration" under the "Implement" ECM.
Show/hide table
 | |
| Illustration 2 | g02624196 |
Calibrations Screen | |
- Set the Parking Brake and press the "Next >" button.
Once the calibration procedure begins, errors may occur that will abort the calibration. The errors must be corrected to perform the calibration.Show/hide tableTable 1 ERROR CODE ISSUE DESCRIPTION CAUSES ACTION TO TAKE 0x0002 Active Diagnostic Code Present. A related component fault is active Troubleshoot, repair, and clear active fault codes 0x10F0 Calibration Value Out of Range Low Component was not set at proper position during this step of the calibration.
Component is too far out of range to calibrate.Retry calibration, setting component in the proper position. If Error code still present, replace component. 0x10F1 Calibration Value Out of Range High Component was not set at proper position during this step of the calibration.
Component is too far out of range to calibrate.Retry calibration, setting component in the proper position. If Error code still present, replace component.
Show/hide table
 | |
| Illustration 3 | g02622292 |
Bowl Lever Sensor Calibration Screen | |
- Follow instructions from the Cat ET calibration procedure screens to complete component calibration.
Caterpillar Information System:
994H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Configure
Cat® Detect Object Detection System MID 134 - CID 3318 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3319 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3322 - FMI 11
Cat® Detect Object Detection System MID 134 - CID 3323 - FMI 11
Installation Procedure for 368-8120 Hydraulic Ar for 963D Track-Type Loaders{1408, 5057, 5133, 6129} Installation Procedure for 368-8120 Hydraulic Ar for 963D Track-Type Loaders{1408, 5057, 5133, 6129}
2011/06/27 An Improved Relay is Now Used on Certain Cat Products {4493}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Access Doors and Covers
XQ400 Power Module Spark Plugs - Inspect/Adjust/Replace - Spark Plugs with Adjustable Electrode Gaps
Rework Procedure for 3E-5184 Secondary Steering Electronic Control Module {4348} Rework Procedure for 3E-5184 Secondary Steering Electronic Control Module {4348}
2011/07/11 The Paint Process Has Been Improved on Certain Components for D6T Track-Type Tractors {7000, 7559, 7581}
950K and 962K Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
854K Wheel Dozer and 992K Wheel Loader C32 Engine Supplement Transmission Oil Cooler Core - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Refrigerant Compressor
950K and 962K Wheel Loaders Machine Systems Steering Neutralizer Valve (Command Control Steering) - Remove and Install
950K and 962K Wheel Loaders C7.1 Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Engine Oil Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Fuel Pressure Sensor
D3K2, D4K2 and D5K2 Track-Type Tractors Engine Supplement Boost Pressure Sensor
950K and 962K Wheel Loaders C7.1 Engine Supplement Flame Detection Temperature Sensor - Remove and Install - Flame Detection Temperature Sensor for the Combustion Head
910K and 914K Compact Wheel Loaders Battery or Battery Cable - Inspect/Replace
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control Module
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Solenoid Valve (Differential Lock)