Gear Pump (Flywheel Scavenge) - Disassemble
解体步骤
开始:
- 拆卸齿轮泵。 请参阅解体与组装, "齿轮泵(飞轮回油)- 拆卸"。
- 从盖 (1) 上拆下螺栓 (10) 、盖 (9) 、轴承 (8) 、环 (7) 、齿轮 (6) 、键 (5) 、轴 (4) 、环 (3) 和轴承 (2) 。
Show/hide table
图 1 | g01302482 |
Caterpillar Information System:
2006/10/02 Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129} Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Transfer Pump - Test
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290} Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Filter Is Restricted
C9 Engines for Motor Graders Fuel Filter Differential Pressure - Test
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller Frame
D6G Series II Track-Type Tractor Machine Systems Bulldozer Brace - Remove and Install
2006/09/18 A New Alternator Support and a New Belt are Used {1397, 1405}
C11 and C13 Engines and 14M and 16M Motor Graders CAN Data Link - Test
657G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Remove
Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050} Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050}
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Assemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Install
D6G Series II Track-Type Tractor Machine Systems Bulldozer Blade - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Forward Gear - Program
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Reverse Gear - Program
AD55B Underground Articulated Truck Belt - Inspect/Replace
AD55B Underground Articulated Truck Steering System General Information
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove