Maximum Reverse Gear - Program
Submode 21 is used in order to set the highest obtainable speed when the machine is in reverse.
- Use the 4C-8195 Control Service Tool to enter Transmission Calibration Mode (6) via the "MODE" switch. Then enter submode 21 by using the "SCROLL" switch.
- Use the INCREMENT (+) and DECREMENT (−) positions of the "CLEAR" switch in order to select the desired maximum speed (R1, R2, R3, or R4).
- To exit submode 21, scroll to the next submode by using the "SCROLL" switch or exit the Transmission Calibration Mode by using the "MODE" switch.
Caterpillar Information System:
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Forward Gear - Program
D6G Series II Track-Type Tractor Machine Systems Bulldozer Blade - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Install
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Assemble
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Disassemble
2006/10/02 Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129} Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Transfer Pump - Test
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290} Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Filter Is Restricted
C9 Engines for Motor Graders Fuel Filter Differential Pressure - Test
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller Frame
AD55B Underground Articulated Truck Belt - Inspect/Replace
AD55B Underground Articulated Truck Steering System General Information
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fan - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Housing (Front) - Disassemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Housing (Front) - Remove