Crankshaft - Remove
开始:
- 拆下发动机机油安全阀。 请参阅拆解和组装, "发动机机油安全阀 - 拆卸和安装"。
- 拆下曲轴后密封。 请参阅拆解和组装, "曲轴后油封 - 拆卸和安装"。
- 拆下发动机机油泵和吸油管。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
- 拆下活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 应将发动机安装在合适的台架上,使后端朝上。
Show/hide table
图 1 g01311526 典型示例 - 将螺栓 (2) 从缸体上拆下。
- 从缸体上拆下六角头螺钉 (1)。
Show/hide table
图 2 g01311527 典型示例 - 将适当的起吊设备 (3) 连接在曲轴组件 (4) 上。
- 小心地从缸体上提起曲轴组件 (4)。 如有必要,使用软面锤轻敲曲轴的鼻端。
注: 安装曲轴皮带轮的螺母,以保护曲轴的鼻端。 不要刮擦曲轴上的任何精加工表面。
Caterpillar Information System:
AD55B Underground Articulated Truck Steering System General Information
AD55B Underground Articulated Truck Belt - Inspect/Replace
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Reverse Gear - Program
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Forward Gear - Program
D6G Series II Track-Type Tractor Machine Systems Bulldozer Blade - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Install
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Assemble
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Disassemble
2006/10/02 Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129} Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Transfer Pump - Test
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290} Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fan - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Housing (Front) - Disassemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Housing (Front) - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble