Scavenge Pump and Mounting (Flywheel) - Install
安装步骤
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上，从而可能导致以后出现故障。 检验所有零件。 如果任何零件磨损或损坏，则应使用新件进行更换。
- 安置扫油泵和支架 (3) 。 安装螺栓 (2) 。 连接软管组件 (1) 。
Show/hide table
 | |
| 图 1 | g01302305 |
End By: 升起中间和下部曲轴箱防护罩。 请参阅 拆解和组装, "曲轴箱防护罩 - 降下和升起"。
Caterpillar Information System:
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Assemble
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Disassemble
2006/10/02 Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129} Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Transfer Pump - Test
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290} Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Filter Is Restricted
C9 Engines for Motor Graders Fuel Filter Differential Pressure - Test
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller Frame
D6G Series II Track-Type Tractor Machine Systems Bulldozer Brace - Remove and Install
2006/09/18 A New Alternator Support and a New Belt are Used {1397, 1405}
C11 and C13 Engines and 14M and 16M Motor Graders CAN Data Link - Test
D6G Series II Track-Type Tractor Machine Systems Bulldozer Blade - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Forward Gear - Program
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Reverse Gear - Program
AD55B Underground Articulated Truck Belt - Inspect/Replace
AD55B Underground Articulated Truck Steering System General Information
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fan - Remove and Install