Electric Starting Motor - Remove and Install
Show/hide table
发动机的意外起动会对在设备上工作的人员造成伤害或死亡。 |
- 断开蓄电池。
- 在连接电动起动马达的线束组件上做出临时的识别标记。
Show/hide table
图 1 g01326136 典型示例 - 从电动起动马达 (2) 上断开线束组件(未显示)。
- 拆下固定电动起动马达 (2) 的紧固件 (1)。
注: 在拆卸紧固件的过程中,支撑住电动起动马达的重量。
- 从发动机上拆下电动起动马达 (2)。
- 将电动起动马达 (2) 在发动机上安装入位。
- 安装紧固件 (1) 并紧固至扭矩
50 N·m (37 lb ft) 。 - 将线束组件(未显示)连接在电动起动马达 (2) 上。
- 连接蓄电池。
Show/hide table
图 2 | g01326136 |
典型示例 |
Caterpillar Information System:
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft - Remove
AD55B Underground Articulated Truck Steering System General Information
AD55B Underground Articulated Truck Belt - Inspect/Replace
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Reverse Gear - Program
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Maximum Forward Gear - Program
D6G Series II Track-Type Tractor Machine Systems Bulldozer Blade - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Install
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Assemble
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Disassemble
2006/10/02 Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129} Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Transfer Pump - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fan - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Housing (Front) - Disassemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Housing (Front) - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove