Drive Shaft - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 5P-4758 | 挡圈钳组件 | 1 |
| B | 238-9586 | 曲轴转动总成 | 1 |
| C | 9X-8874 | 螺栓 1/2 - 13 × 3 in |
1 |
开始:
- 卸下变速箱分动器。 请参阅拆解和组装, "变速箱分动器 - 拆卸"。
- 降下后部和中间曲轴箱防护罩。 请参阅拆解和组装, "曲轴箱防护罩 - 降下和升起"。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将液压油系统的油排入合适的容器以便保存或废弃这些液压油。 请参阅操作和保养手册, "液压油系统 - 更换"。
- 需要两个人，卸下轴 (2) 和管组件 (1) 。 轴 (2) 的重量约为 29 kg (65 lb)。 管组件 (1) 的重量约为 25 kg (55 lb)。
Show/hide table
 | |
| 图 1 | g01302356 |
- 使用工具 (A) ，卸下挡圈 (3) 。 卸下隔套 (4) 。
Show/hide table
 | |
| 图 2 | g01302358 |
- 断开软管组件 (5) 、 (8) 和 (9) 。 断开管组件 (6) 。 卸下弯管 (7) 。
Show/hide table
 | |
| 图 3 | g01302359 |
- 卸下软管组件 (9) 。 断开软管组件 (10) 和软管组件 (11) 。 卸下连接块 (12) 和 O 形密封圈。
Show/hide table
 | |
| 图 4 | g01302361 |
- 卸下软管组件 (13) 。 卸下管组件 (14) 和夹子 (15) 。 卸下弯管 (17) 和防护罩 (16) 。
Show/hide table
 | |
| 图 5 | g01302362 |
- 将适当的起吊设备连接在管组件 (19) 上。 管组件 (19) 的重量约为 25 kg (55 lb)。 卸下螺栓 (18) 。 如有必要，将工具 (B) 安装到飞轮壳中来转动管组件 (19) 。 卸下管组件 (19) 。
Show/hide table
 | |
| 图 6 | g01302363 |
Show/hide table
 | |
| 图 7 | g01302501 |
- 卸下轭组件 (20) 。
Show/hide table
 | |
| 图 8 | g01302364 |
- 卸下螺母 (21) 。 使用工具 (C) ，卸下轴承保持架 (22) 。
Show/hide table
 | |
| 图 9 | g01302367 |
Caterpillar Information System:
Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050} Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install - Turbocharged Engines
D6K Track-Type Tractor Machine Systems Bottom Guard - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting rods in position
Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004} Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Mounting and Dismounting
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
D6K Track-Type Tractor Machine Systems Bottom Guard - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 55 Amp Alternator
C11 and C13 Engines and 14M and 16M Motor Graders CAN Data Link - Test
2006/09/18 A New Alternator Support and a New Belt are Used {1397, 1405}
D6G Series II Track-Type Tractor Machine Systems Bulldozer Brace - Remove and Install
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller Frame
C9 Engines for Motor Graders Fuel Filter Differential Pressure - Test
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Filter Is Restricted
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290} Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
C11 and C13 Engines and 14M and 16M Motor Graders Fuel Transfer Pump - Test
Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129} Location and Adjusting Procedure for the Bucket Stops {6001, 6107, 6119, 6129}
2006/10/02 Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Disassemble
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Assemble