D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Caterpillar


Mounting and Dismounting

Usage:

242D A9W


Illusztráció 1g00037860
Jellemző példa

Csak azokon a pontokon szálljon fel a gépre és szálljon le a gépről, ahol fellépők és/vagy kapaszkodók vannak. Mielőtt felszállna a gépre, tisztítsa meg a fellépőket és a kapaszkodókat. Ellenőrizze a fellépőket és a kapaszkodókat. Végezze el a szükséges javításokat.

Felszálláskor és leszálláskor mindig szemben legyen a géppel.

A fellépők és a kapaszkodók segítségével tartsa be a három támaszkodási pont szabályát.

Megjegyzés A három támaszkodási pont lehet: két láb és egy kéz. Hárompontos érintkezés lehet egy láb és két kar is.

Ne szálljon fel mozgó gépre! Ne szálljon le mozgó gépről! Soha ne ugorjon le a gépről. Gépre felszállás vagy gépről leszállás közben soha ne vigyen magával szerszámokat vagy felszereléseket. A munkaeszközöket kötéllel húzza fel a vezetőállásra. A vezetőfülkébe történő be- és kiszállás közben semmilyen kezelő berendezést vagy vezérlőkart ne használjon kapaszkodás céljára.

Caterpillar Information System:

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
D6K Track-Type Tractor Machine Systems Bottom Guard - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 55 Amp Alternator
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System System Schematic
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) - Install
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet) - Install
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Install
AD55B Underground Articulated Truck Battery Electrolyte Level - Check
AD55B Underground Articulated Truck Backup Alarm - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004} Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting rods in position
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Remove
D6K Track-Type Tractor Machine Systems Bottom Guard - Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install - Turbocharged Engines
Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050} Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050}
657G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Remove
C11 and C13 Engines and 14M and 16M Motor Graders CAN Data Link - Test
2006/09/18 A New Alternator Support and a New Belt are Used {1397, 1405}
D6G Series II Track-Type Tractor Machine Systems Bulldozer Brace - Remove and Install
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller Frame
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.