Camshaft - Assemble
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 确保凸轮轴组件的所有部件清洁无损坏。
Show/hide table
图 1 g01326129 典型示例 - 用清洁的发动机机油润滑凸轮轴 (1) 的鼻端。 使用合适的压具将轴承 (3) 安装到凸轮轴上。
注: 确保将轴承安装在正确方位。 应将凸轮轴轴承垂直压到凸轮轴上,否则可能会损坏轴承。 切勿按压轴承的外座圈。
- 将垫片 (4) 和月牙键 (2) 安装到凸轮轴 (1) 上。
- 对准齿轮 (5) 和月牙键 (2)。 使用合适的压具将齿轮安装到凸轮轴 (1) 的鼻端。
注: 应将齿轮放在一个合适的支架上,以防止在安装过程中损坏调速器飞锤。
结束:
- 安装凸轮轴组件。 请参阅拆解和组装, "凸轮轴 - 安装"。
Caterpillar Information System:
D6K Track-Type Tractor Machine Systems Bottom Guard - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 55 Amp Alternator
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System System Schematic
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) - Install
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet) - Install
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Install
AD55B Underground Articulated Truck Battery Electrolyte Level - Check
AD55B Underground Articulated Truck Backup Alarm - Test
AD55B Underground Articulated Truck Sampling Interval and Location of Sampling Valve
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Mounting and Dismounting
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004} Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting rods in position
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Remove
D6K Track-Type Tractor Machine Systems Bottom Guard - Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install - Turbocharged Engines
Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050} Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050}
657G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Remove
C11 and C13 Engines and 14M and 16M Motor Graders CAN Data Link - Test
2006/09/18 A New Alternator Support and a New Belt are Used {1397, 1405}
D6G Series II Track-Type Tractor Machine Systems Bulldozer Brace - Remove and Install